Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Product Overview
The Charge Regulator is designed to control the charging from a solar panel (not included) into a 12 volt DC battery (not included). The charged battery then powers a 12 volt DC tool, appliance, etc.
General Operating Instructions
1.Connect a 12 volt DC battery, solar panel, and a 12 volt DC tool, appliance, etc. as shown in the illustration below. IMPORTANT: Always connect the battery first. (See Figure A.)
|
| (Yellow) |
|
|
| |
|
| CHARGING | ||||
HIGH VOLTAGE |
|
|
| LOW VOLTAGE | ||
|
|
|
|
| (DISCHARGE PROTECTION) | |
|
| |||||
(Green) |
|
| (Red) | |||
|
| TO |
|
|
| |
|
| SOLAR |
|
|
| |
|
| PANEL |
|
|
| |
| TO | TO | ||||
| BATTERY | LOAD | ||||
BATTERY
SOLAR PANEL
LOAD
NOT INCLUDED
FIGURE A
+
SKU 96728 | For technical questions, please call | Page 5 |
