OFBU | Installation Instructions |
INSTALLATION
WARNING: FAILURE TO PROVIDE ADEQUATE STRUCTURAL STRENGTH FOR THIS COMPONENT CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installer’s responsibility to make sure the structure to which this component is attached can support five times the combined weight of all equipment. Reinforce the structure as required before installing the component.
1.Verify mounting brackets on wall bracket (A) can move freely. (See Figure 1)
A |
1 |
x4 |
Figure 1
2.Locate desired installation location and slide upper mounting plate into wall making sure bracket is seated in channel bottom. (See Figure 2)
3.Let lower mounting plate rest against wall.
4.Using 1/2" socket, tighten tension screw until lower mounting plate slides into channel in wall and continue tightening until resistance is felt. (See Figure 2)
| 2 |
| 4 |
A |
|
| A |
3 | 4 |
|
Figure 2
5.Tighten two upper and lower button head cap screws to secure wall bracket (A) to wall. (See Figure 3)
A |
x4 |
5 |
5 |
Figure 3
IMPORTANT ! : If the display being installed has a recessed mounting surface, the display must be assembled to the mount prior to mount installation. See Display Installation in the installation instructions included with the mount being installed.
6.Install mount to OFBU following the instructions outlined in the installation instructions provided with the mount being installed.
4
