I N S T A L L A T I O N I N S T R U C T I O N S
RPA SERIES PROJECTOR LOCK
(PL-4)
The
INSTALLATION
1.Two methods of installation are possible:
a.Run steel cable through projector handle and then through RPA series ceiling mount.
b.Before attaching adhesive plate, clean area on projector with alcohol wipe. Attach the adhesive retainer plate to exterior chassis of the projector.
PARTS LIST
Unpack the shipping carton and check for the contents listed in Table 1.
Table 1. Parts List
REF | DESCRIPTION | QTY |
|
|
|
10 | ADHESIVE RETAINER PLATE | 1 |
|
|
|
20 | CABLE LOCK ASSEMBLY | 1 |
|
|
|
30 | KEYS | 2 |
|
|
|
40 | ALCOHOL WIPE | 1 |
|
|
|
NOTE: Adhesive will secure retainer in plate to projector and become fixed. For maximum adhesive strength, adhere retainer plate to projector and do not attempt to remove the cable lock right away. Allow the adhesive to become stronger and cure over time.
2.Securely lock cable to cylinder lock.
3.Retain keys.
Lock | RPA | SLB- Hanging |
Assembly | Bracket |
Clip Retainer with | Projector |
Adhesive Backing. |
|
Adhere to Projector. |
|
Chief Manufacturing, a division of Milestone AV Technologies | ||
8401 Eagle Creek Parkway | ©2008 Milestone AV Technologies | |
Savage, MN 55378 USA |
| www.chiefmfg.com |
P: 800.582.6480 / 952.894.6280 | F: 877.894.6918 / 952.894.6918 | 10/08 |
|
|
|
|
|
|
