RMF2/RLF2/RXF2

Installation Instructions

Install Wall Plate to Wall - Concrete or

3. Drill 5/16" (8mm) diameter pilot holes into wall at marked

Concrete Block

locations. Holes must be drilled at least 3 1/4 inches deep.

(See Figure 5)

 

4.

Install four or six concrete anchors (E) into drilled holes. Use

WARNING: Failure to provide adequate structural strength

 

a hammer to tap anchors into holes. (See Figures 6 and 7)

IMPORTANT ! : The anchors must be installed through

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

any wall covering until flush with the concrete wall. (See

make sure the structure to which this component is attached

Figure 6)

 

can support five times the combined weight of all equipment.

concrete

 

Reinforce the structure as required before installing the

 

wall

 

component. The wall to which the mount is being attached

 

 

 

 

may have a maximum drywall thickness of 5/8" (1.6cm).

 

 

 

 

 

 

Pilot Hole -

WARNING: ELECTRICAL SHOCK HAZARD! CUTTING

 

(D)

5/16 x 3 1/4"

 

(M8 x 82.5mm)

OR DRILLING INTO ELECTRICAL CORDS OR CABLES

 

 

 

CAN CAUSE DEATH OR SERIOUS PERSONAL INJURY!

 

(C)

 

ALWAYS make certain area behind mounting surface is free

 

 

 

 

 

of electrical wires and cables before drilling or installing

 

 

Anchor (E)

fasteners.

 

 

WARNING: EXPLOSION AND FIRE HAZARD! CUTTING

 

 

Anchor

OR DRILLING INTO GAS PLUMBING CAN CAUSE DEATH

 

 

 

 

flush with

OR SERIOUS PERSONAL INJURY! ALWAYS make certain

 

 

 

 

concrete

area behind mounting surface is free of gas, water, waste, or

 

 

 

(A)

wall

any other plumbing before cutting, drilling, or installing

 

 

 

fasteners.

 

 

 

1. Unfold wall plate (A) to prepare it for mounting to wall. (See

wall covering

 

Figure 1)

 

 

 

2. Level wall plate (A) and mark locations of pilot holes at

 

 

 

desired mounting location. (See Figure 5)

 

 

 

IMPORTANT ! : The RMF2-RLF2-RXF2 mounts are

Figure 6

 

 

5. Using 1/2" (12.7mm) wrench, install screws (C) through flat

designed to be mounted to 8" concrete or 8"x8"x16"

concrete block.

washers (D), wall plate (A) and into concrete anchors (E).

(See Figure 7)

 

 

NOTE: For the RLF2, either the inner or outer four holes may

 

 

 

 

 

be used.

4

 

(E) x 4 or 6

NOTE: For the RXF2, use the outer four holes and the two

 

 

 

 

 

 

middle holes on wall plate for installation.

(D) x 4 or 6

 

 

 

 

 

NOTE: The vertical center of the display will be even with the center line indicated on the labels located directly below each hinge. Keep this in mind when determining mounting location. (See Figure 5)

2

 

 

x 4 or 6

 

 

3

 

 

CENTER

 

 

LINE

 

 

5

(C) x 4 or 6

(A)

Figure 5

Figure 7

8

Page 7 Page 9
Page 8
Image 8
Chief Manufacturing RLF2, RXF2, RMF2 installation instructions Install Wall Plate to Wall Concrete or, Concrete Block
Page 7 Page 9

RLF2, RMF2, RXF2 specifications

Chief Manufacturing, a leading provider of innovative mounting solutions, has designed a range of products that cater to the evolving needs of modern AV environments. The RXF2, RMF2, and RLF2 series exemplify the company's commitment to quality, functionality, and user experience.

The RXF2 series is engineered for the future of digital displays, offering flexible mounting solutions for flat screens in various settings. A standout feature of the RXF2 is its versatile design, which accommodates a wide range of screen sizes and is compatible with different VESA patterns. This adaptability ensures that users can configure their displays in numerous ways, whether it's for a corporate office, a retail environment, or an educational establishment. Furthermore, the RXF2 boasts an easy installation process, featuring a simplified mounting system that speeds up assembly while ensuring stability and safety.

Next in line, the RMF2 series caters to ceiling-mounted applications, perfect for environments where wall space is a premium. The RMF2 mount incorporates a unique tilting mechanism that provides optimal viewing angles while remaining discreet. This mounting solution supports a range of display weights, ensuring robust support without compromising aesthetics. Its quick-release feature allows for effortless screen maintenance, making it ideal for high-traffic areas.

Lastly, the RLF2 series is designed for versatile wall installations. This ultra-slim mount allows for close-to-wall display setups while maintaining a sleek profile. The RLF2 features advanced locking mechanisms for added security, reducing the risk of accidental dismounts. With its easy-adjust capability, users can align their displays for perfect positioning, ensuring an enhanced viewing experience in any space.

Across the RXF2, RMF2, and RLF2 series, Chief Manufacturing prioritizes advanced technologies that streamline installation and maintenance. Each model is built from high-quality materials, ensuring durability and longevity in demanding environments. The incorporation of modular designs allows for customization, adapting to various project requirements seamlessly.

In summary, Chief Manufacturing’s RXF2, RMF2, and RLF2 series stand out in the crowded market of AV mounts due to their versatile features, innovative technologies, and robust construction. They cater to diverse mounting needs while prioritizing ease of use and installation efficiency, making them the ideal choice for any professional setting. As technology continues to evolve, Chief remains at the forefront, delivering solutions that enhance both functionality and design.
Top Page Image Contents