PLACING THE LANTERN BODY ON THE FRAME
1.Open all four zippers on the top of the Lantern body.
2.Turn the Speed Ring vertically with one pole pointed up.
3.Align one of the corner seams in the Lantern body with the
4.Pull the body over the pole until the curve in the pole fits in the curve in the body.
5.Pull the rest of the body over the remaining poles. The last corner assembled will go on tighter than the others corners.
6.Close the zippers on top of the Lantern (photo 6).
7.The fully assembled Lantern will appear as in photo 7.
8.Attach the assembled Lantern to the light fixture.
9.Attach the light fixture to a light stand or boom arm.
Photo 5 | Photo 6 | Photo 7 |
MOUNTING THE SKIRT ON THE LANTERN
1.Unzip one of the corner zippers in the Skirt from top to bottom.
2.Wrap the Skirt around the Lantern, making sure the corners are aligned.
3.Align the
4.Zip up the open zipper (photo 9).
5.Adjust the Skirt as desired by unzipping the corner zippers from bottom to top and rolling up the sides (photo 10).
Photo 8 | Photo 9 | Photo 10 |
1812 Valtec Lane, Boulder, CO 80301
2
