Computer Input
Screen Size Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
1 | Press the MENU button and the |
| Press the Point Left/Right button to move the red frame pointer |
| to the Screen Menu icon. |
2 | Press the Point Down button and move the red frame pointer to |
| the function that you want to select and then press the SELECT |
button.
Normal
Provides image to fit screen size.
True
Provides image in its original size. When the original image size is larger than the screen size (1024 x 768), this projector enters “Digital zoom +” mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.
Digital zoom +
When the Digital zoom + is selected, the
A projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control.
Digital zoom –
When the Digital zoom – is selected, the
A projected image can be also compressed by pressing the D.ZOOM
▼button on the remote control.
To cancel the Digital Zoom +/– mode, press any button except the D.ZOOM ▲/▼, SELECT,
Screen Menu
Screen Menu icon
Move the red frame to the function and press the SELECT button.
NOTE
●This Screen Menu cannot be operated when “720p (HDTV)”, “1035i (HDTV)”, or “1080i (HDTV)” is selected in the PC System Menu (p25).
●The True and Digital zoom +/– cannot be selected when “480i”, “575i”, “480p”, or “575p” is selected in the PC System Menu (p25).
●This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting to the projector.
●The image data in other than XGA (1024 x 768) is modified to fit the screen size in initial mode.
●The panning function may not operate properly if the computer system prepared in the PC Adjust Menu is used.
31
