PREPARATION

LENS INSTALLATION

Before setting up a projector, install Projection Lens on a Projector.

1.Before installation, check where a projector is used and prepare suitable lens. For specifications of Projection Lens, refer to manual separately attached or contact sales dealer where you purchased a projector.

2.For installation, refer to installation manual supplied to a Projector.

When moving or setting up a projector, be sure to replace a Lens Cover to protect a surface. And be careful not to hold or subject a lens to strong forces. It may damage lens, cabinet, or mechanical parts.

POSITIONING PROJECTOR

This projector is designed to project on a flat projection

SCREEN

surface.

 

ROOM LIGHT

 

Brightness in room has a great influence on picture

 

quality. It is recommended to limit ambient lighting in

 

order to provide best image.

 

VENTILATION

This projector is equipped with cooling fan to protect it from over- heating. Pay attention to following to ensure proper ventilation and avoid a possible risk of fire and malfunction.

Do not cover vents with papers or other materials.

Keep rear grill at least 3 feet (1 m) away from any object.

Make sure that there are no objects under a projector. An object under a projector may prevent a projector from taking cooling air through bottom vent.

AIR INTAKE VENT (BOTTOM SIDE)

EXHAUST VENT (REAR SIDE)

LENS SHIFT ADJUSTMENT

Projection lens can be moved up, down, left and right with motor-driven lens shift function. This function makes it easy to provide projected image where you want.

Use LENS SHIFT button and

POINT UP/DOWN button to move image up or down. (Refer to page 23.)

Use LENS SHIFT button and POINT LEFT/RIGHT button to move image left or right.

(Refer to page 23.)

MOVED UP OR DOWN

MOVED LEFT OR RIGHT

9

Page 9
Image 9
Christie Digital Systems 38-VIV402-01 Preparation Lens Installation, Positioning Projector, Lens Shift Adjustment