Christie HD Series

6

HD7Kc

HD8K

Roadster HD12K

Roadster HD18K

 

6500 ANSI lumens

8000 ANSI lumens

12,000 ANSI lumens (±10%)

18,000 ANSI lumens (±10%)

 

[7200 center lumens]

[8800 center lumens]

[13,200 center lumens]

[19,800 center lumens]

 

1600-2000:1 (full on/off) 400:1 min ANSI

90% brightness

3-chip 0.95" DMD

HD (1920 x 1080)

1.2kW CERMAX® Xenon pre-aligned lamp module

2.0kW Xenon bubble lamp module

3.0kW Xenon bubble lamp module

1500 hours (typical) lifetime

1000 hours (typical) lifetime

750 hours (typical) lifetime

HDTV formats VGA through to QXGA (2048 x 1536) Accepts all current HDTV/DTV formats

Multi-standard video decoder Horizontal and vertical scaling, all inputs

210 MHz

15 kHz to 120 kHz Horizontal 23.97 Hz to 150 Hz Vertical

RGBHV/YPbPr via 5 BNC DVI-I – digital/analog RGB/YPbPr (HDCP) One composite video, one S-video

Two optional slots for analog/digital modules 2 RS-232 ports, 1 GPIO port, 1 RS-422 port

On-board ChristieNET™ connectivity (RJ45) Built-in backlit keypad and IR remote control

Dust sealed, 3-chip DMD light engine Motorized horizontal and vertical lens offset Scheimpflug (tilt) adjustment

Built-in light shutter Tool-free lens insertion system

0.67:1*, 1.1:1

1.16-1.49:1, 1.4-1.8:1, 1.8-2.6:1, 2.6-4.1:1, 4.1-6.9:1, 6.9-10.4:1

±120% Vertical ±42% Horizontal (* ±50%V ±20%H)

IR keypad (w/batteries) Line cord User manual Input modules – Dual SD/HD-SDI, DVI

Christie Twist™ image warping and edge-blending module Input modules Dual SD/HD-SDI, DVI and legacy interface modules

Wired remote control and RS-422 Remote IR sensor Ethernet, RS-232, RS-422 cables Service manual KoRE™ 10-bit librarian

Lens adapter (can be used with competitors lenses) Stacker and more (see accessories brochure)

LiteLOC™ Film-like color reproduction with Kc models Comprehensive Color Adjustment (CCA™)

User replaceable bulb in Roadster models Intelligent Lens System (ILS™) for zoom and focus on the zoom lenses

Built-in edge blending Menus in five languages 50 channel memories Auto setup Digital keystone correction

200 VAC to 240 VAC ± @ 50/60 Hz

10A @ 200 VAC

2000W maximum

6825 BTU/hr

15A @ 200 VAC

14.8A @

264 VAC

 

3000W

3900W

10,236 BTU/hr

13,320

BTU/hr

(LxWxH): 22.3 x 26.0 x 12.32" (566 x 660 x 313mm)

 

(LxWxH): 32.1 x 24.5 x 15.1" (814.8 x 631.4 x 384mm)

7132 in3 (116,924 cm3)

 

11,875 in3 (197,555 cm3)

 

80 lb (36.3 kg)

135 lb (61.4 kg)

160 lb (72.6 kg)

125 lb (56.7 kg)

160 lb (72.6 kg)

230 lb (104.3 kg)

Temperature: 40 to 95º F (5 to 35º C) Humidity: 20-80% non-condensing

This product conforms to the following regulations related to product safety, environmental requirements and electromagnetic compatibility (EMC):

FCC Part 15, Subpart B Class A; CISPR22/EN55022; CISPR24/EN55024 UL 60950-1 First Edition; CAN/CSA-C22.2 No 60950-1-03 First edition;

IEC60950-1:2001 2002/95/EC RoHS

2 years parts and labor (including light engine) Contact an authorized Christie representative for full details of our limited warranty

Page 7
Image 7
Christie Digital Systems manual Christie HD Series HD7Kc, HD8K, Roadster HD12K Roadster HD18K