w w w . c h r y s a l i s a c o u s t i c s . c o m

U S A G E

This section addresses EQ set-up and day-to-day usage of your IA-400D amplifier.

Remote Control

The features of the IA-400D remote control are listed below.

•POWER — This button forces your IA-400D amplifier unit into standby mode. The power LED turns amber, the numeric LED shuts off, and the amplifier puts out no power. The unit will remain in this mode until the POWER button is pressed again. To fully deactivate (i.e. power down) the unit, use the main power switch on the back panel.

Note: The master power switch on rear panel must be on in order for the front power button to function.

•MUTE — This button mutes the subwoofer’s output. The LED on the amplifier will show 00 if the unit is muted. To unmute the subwoofer, press the MUTE button again and the original volume setting shows on the LED.

•EQ — This button automatically EQs the subwoofer using a 5-band internal graphic equalizer.

To use this feature, first plug the supplied microphone into the Mic-In jack on the front panel of the amplifier and place the mic in your preferred listening position. Then press EQ on the remote for about 2-3 seconds. The subwoofer emits 12 “sweep tones” that cover the frequencies between 20 and 150 Hz. The LED displays “AU” during the Auto-EQ process. After the sweeps are complete, the unit saves its EQ settings and returns to normal operation. To prevent accidental invocation of the EQ feature, you must hold down the EQ button for 2-3 seconds before the EQ sweeps begin.

Figure 4: IA-400D Remote.

Note: Each time the EQ feature is utilized, the EQ settings for the IA-400D amplifier are reset. If the microphone is not plugged in, the IA-400D amplifier will emit one or two sweep tones then cease the EQ operation. In this case, the previous EQ settings will be preserved.

•PHASE — These buttons allow you to optimize the subwoofer performance for the location and your listening position. Play some bass- heavy music. While listening, push one of the four phase buttons, listen for a few moments, and then press the next phase button. In most installations, one of the four button positions will offer an audibly better blend of subwoofer and speakers. Selecting the correct phase position is just that easy. The LED will show the phase selected by showing “PH” followed by the phase number:

0, 90, 180 or 270.

•LIGHT — If you wish, you can deactivate the numeric LED on your IA-400D amplifier. To do this, press the LIGHT button on your remote. To reactivate the LED, press the LIGHT button again.

•NIGHT — Night mode limits the maximum dynamic output of the subwoofer for late night listening or to be more considerate of close neighbors. Press the night button to turn the night mode feature on or off. Activation of night mode causes “n” to appear briefly on the display. When night mode is deactivated, the display shows “n off” and then returns to normal function.

•VOLUME CONTROL — This control allows you to balance the output from the subwoofer to the main speakers in your system.

This control should be set to achieve similar volume level of both the main speakers and subwoofer. When pressing volume up or down, the volume level change is shown on the numeric LED on the front panel.

InstallAdvantage IA-400D Amp manual

10

Page 12 Page 14
Page 13
Image 13
Chrysler IA-IWS1 manual Remote Control, IA-400D Remote
Page 12 Page 14

IA-IWS1, IA-400D specifications

The Chrysler IA-IWS1, IA-400D is a prominent entry in the realm of automotive innovation, representing a unique blend of functionality, performance, and advanced technology. Chrysler has long been a name associated with reliability and innovation, and the IA-IWS1, IA-400D continues that legacy with its impressive array of features.

At the heart of the IA-400D is its powerful engine, which is designed to deliver exceptional performance while maintaining fuel efficiency. This feature is particularly appealing to consumers looking for a balance between power and economy. The engine's design incorporates advanced engineering and materials, allowing it to operate smoothly while minimizing emissions, thus adhering to stringent environmental standards.

The IA-IWS1 model is equipped with Chrysler’s latest infotainment technology. The user-friendly interface is designed to keep drivers informed and entertained. It supports various connectivity options, including Bluetooth, USB, and smartphone integration, enabling seamless access to navigation, music, and communication applications. A high-definition touchscreen display not only enhances the aesthetic appeal but also improves usability, creating an engaging driving experience.

Safety is another cornerstone of the IA-IWS1, IA-400D. It includes a comprehensive suite of advanced safety features, such as adaptive cruise control, lane-keeping assist, and automated emergency braking. These technologies work together to enhance driver awareness and prevent accidents, demonstrating Chrysler’s commitment to ensuring the safety of both drivers and passengers.

The exterior design of the IA-IWS1 is built for aerodynamics, with sleek lines that contribute to improved fuel efficiency and reduced wind noise. The vehicle also boasts a robust chassis that enhances stability and handling, ensuring a smooth and comfortable ride regardless of road conditions.

Inside, the IA-IWS1 provides a spacious and well-appointed cabin that combines comfort with practicality. High-quality materials and thoughtful design elements create an inviting atmosphere for all passengers. Ample cargo space further enhances its versatility, making it suitable for both daily commutes and long-haul journeys.

In summary, the Chrysler IA-IWS1, IA-400D showcases a harmonious fusion of powerful performance, cutting-edge technology, and unparalleled safety features. Its blend of style and functionality makes it a noteworthy option for modern drivers seeking a dependable vehicle that meets diverse needs while reflecting Chrysler’s commitment to innovation and quality.
Top Page Image Contents