24
Step3 Under AAA in the left frame, click MAC Filtering. The Security MAC Filtering page appears.
Step4 Click New. The MAC Filters New page appears.
Step5 Enter the MAC address of the access point in the MAC Address field. You can also use the
config macfilter add command to add a MAC filter entry to the controller.
Step6 Select a WLAN ID or Any WLAN from the WLAN ID pop-up menu.
Step7 Enter a description (32 characters maximum) of the access point in the Description field.
Step8 Choose an interface from the Interface Name pop-up menu.
Step9 Click Apply.
Step10 Repeat this process to add other access points to the list.
Note You can also use the controller CLI command config macfilter add to add a MAC
filter entry on the controller.
Step11 On the menu bar, click Monitor to return to the Monitor Summary page.
Verifying Controller Association
To verify that your access point is associated to the wireless LAN controller, perform these steps:
Step1 Log into your controller web interface (https) using a web browser.
Step2 Click Wireless and verify that your access point MAC address is listed under Ethern et MAC.
Step3 Log out of the controller and close your web browser.