Cisco Systems 1800 ip dhcp excluded-address low-address, ip dhcp pool name, import all, exit

Chapter 5 Configuring a LAN with DHCP and VLANs

		Configure DHCP
	Command	Purpose
Step 3
	ip dhcp excluded-address low-address	Specifies IP addresses that the DHCP server should
	[high-address]	not assign to DHCP clients. In this example, we are
		excluding the router address.
	Example:
	Router(config)# ip dhcp excluded-address
	192.168.9.0
Step 4
	ip dhcp pool name	Creates a DHCP address pool on the router and
		enters DHCP pool configuration mode. The name
	Example:	argument can be a string or an integer.
	Router(config)# ip dhcp pool dpool1
	Router(config-dhcp)#
Step 5
	network network-number [mask prefix-length]	Defines subnet number (IP) address for the DHCP
		address pool, optionally including the mask.
	Example:
	Router(config-dhcp)# network 10.10.0.0
	255.255.255.0
	Router(config-dhcp)#
Step 6
	import all	Imports DHCP option parameters into the DHCP
		portion of the router database.
	Example:
	Router(config-dhcp)# import all
	Router(config-dhcp)#
Step 7
	default-routeraddress [address2...address8]	Specifies up to 8 default routers for a DHCP client.
	Example:
	Router(config-dhcp)#default-router 10.1.1.1
	Router(config-dhcp)#
Step 8
	dns-serveraddress [address2...address8]	Specifies up to 8 DNS servers available to a DHCP
		client.
	Example:
	Router(config-dhcp)#dns-server 192.168.35.2
	Router(config-dhcp)#
Step 9
	domain-name domain	Specifies the domain name for a DHCP client.
	Example:
	Router(config-dhcp)# domain-name cisco.com
	Router(config-dhcp)#
Step 10
	exit	Exits DHCP configuration mode, and enters global
		configuration mode.
	Example:
	Router(config-dhcp)# exit
	Router(config)#
	Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
OL-6426-02			5-3