Cisco Systems 2960 Configuring Time and Date Manually

6-11
Catalyst 2960 Switch SoftwareConfiguration Guide
78-16881-01
Chapter6 Administering the Swi tch
Managing the System Time and Date
The specified interface is used for the source address for all packets sent to all destinations. If a source
address is to be used for a specific association, use the source keyword in the ntp peer or ntp server
global configuration command as described in the “Configuring NTP Associations” section on page 6-6.
Displaying the NTP Configuration
You can use two privileged EXEC commands to display NTP information:
•show ntp associations [detail]
•show ntp status
For detailed information about the fields in these displays, see the Cisco IOS Configuration
Fundamentals Command Reference, Release 12.2.
Configuring Time and Date Manually
If no other source of time is available, you can manually configure the time and date after the system is
restarted. The time remains accurate until the next system restart. We recommend that you use manual
configuration only as a last resort. If you have an outside source to w hich the switch can synchronize,
you do not need to manually set the system clock.
These sections contain this configuration information:
•Setting the System Clock, page 6-11
•Displaying the Time and Date Configuration, page 6-12
•Configuring the Time Zone, page 6-12
•Configuring Summer Time (Daylight Saving Time), page 6-13
Setting the System Clock
If you have an outside source on the network that provides time services, such as an NTP server, you do
not need to manually set the system clock.
Beginning in privileged EXEC mode, follow these steps to set the system clock:
Step4 show running-config Verify your entries.
Step5 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Command Purpose
Step1 clock set hh:mm:ss day month year
or
clock set hh:mm:ss month day year
Manually set the system clock using one of these formats.
•For hh:mm:ss, specify the time in hours (24-hour format), minutes,
and seconds. The time specified is relative to the configured time
zone.
•For day, specify the day by date in the month.
•For month, specify the month by name.
•For year, specify the year (no abbreviation).