Cisco Systems 350, CB20A Safety information, FCC Safety Compliance Statement, Safety Guidelines

Chapter 2 Preparing for Installation

Safety information

Safety information

Follow the guidelines in this section to ensure proper operation and safe use of the client adapter.

FCC Safety Compliance Statement

The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to RF electromagnetic energy emitted by FCC-certified equipment. When used with approved Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio device according to the instructions in this publication will result in user exposure substantially below the FCC recommended limits.

Safety Guidelines

•Do not touch or move the antenna while the unit is transmitting or receiving.

•Do not hold any component containing a radio such that the antenna is very close to or touching any exposed parts of the body, especially the face or eyes, while transmitting.

•Do not operate the radio or attempt to transmit data unless the antenna is connected; otherwise, the radio may be damaged.

•High-gain, wall-mount, or mast-mount antennas are designed to be professionally installed and should be located at a minimum distance of 12 inches (30 cm) or more from the body of all persons. Please contact your professional installer, VAR, or antenna manufacturer for proper installation requirements.

•Use in specific environments:

–The use of wireless devices in hazardous locations is limited to the constraints posed by the safety directors of such environments.

–The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA).

–The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.

Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows

2-2 OL-1394-08