Cisco Systems 4000 manual Software Compatibility, Series Specifications, System Specifications

Series Specifications

Table 1-1	System Specifications
Description		Specification
Dimensions (H x W x D)		3.4 x 17.6 x 17.7" (8.6 x 44.7 x 45 cm)
Weight		24 lb (10.9 kg) (including the chassis and network processor
		modules)
Power		100–240 VAC, 50–60 Hz, 3.0–1.5A or 40–72 VDC, 5–2.8A
Wire gauge for DC-input		14 AWG1
power connections
Network interface options		Ethernet, serial, Token Ring, FDDI, BRI, G.703, channelized
		T1/PRI, channelized E1/PRI, ATM
Serial interfaces		EIA/TIA-232, EIA/TIA-449,V.35, X.21, NRZ/NRZI, DTE/DCE,
		EIA-530 DTE
Console port		EIA/TIA-232 DB-25 female connector
Auxiliary port		EIA/TIA-232 DB-25 male connector
Nonoperating temperature		– 40–185°F (– 40–85°C)
Operating humidity		5–95%, noncondensing
Operating temperature		32–104°F (0–40°C)
Regulatory compliance		FCC Class A, FCC Part 68, Canadian DOC Class A, CS-03, UL
		1950 2nd edition, CAN/CSA 950-M93, EN60950 with
		Amendments 1 and 2, AN/NZS 3260, NOM 019

Additional regulatory compliance is in the Cisco 4000 Series Public

Network Certification document that shipped with your router.)

1. AWG = American Wire Gauge

Software Compatibility

Network processor modules must be supported by the appropriate level of system software. The minimum system software version for the original Cisco 4000 was Software Release 9.1; for the Cisco 4000-M, Software Release 9.14; for the Cisco 4500, and Cisco 4500-M, Cisco Internetwork Operating System (Cisco IOS) Release 10.2; for the Cisco 4700-M, Cisco IOS Release 10.3(10). Table 1-2lists the minimum system software versions for network processor modules.

1-6Cisco 4000 Series Installation Guide