Cisco Systems 4000 appendix Site Log, Required Tools and Equipment

Site Log

Site Log

The Site Log provides a historical record of all actions relevant to the router. Keep it in an accessible place near the chassis where anyone who performs tasks has access to it. Use the Installation Checklist to verify steps in the installation and maintenance of your router. Site Log entries might include the following:

•Installation progress—Make a copy of the Installation Checklist and insert it into the Site Log. Make entries as each procedure is completed.

•Upgrades and removal or replacement procedures—Use the Site Log as a record of ongoing router maintenance and expansion history. Each time a procedure is performed on the router, update the Site Log to reflect the following:

—Additional network processor modules installed

—Removal or replacement of network processor modules

—Configuration changes

—Maintenance schedules and requirements

—Maintenance procedures performed

—Intermittent problems

—Related comments

Warning Ultimate disposal of this product should be handled according to all national laws and regulations. (To see translated versions of this warning, refer to the appendix “Translated Safety Warnings.”)

Required Tools and Equipment

You need the following tools and equipment to install the router:

•

•

ESD cord and wrist strap

Screwdrivers, Number 1 and Number 2 Phillips

•One serial port adapter cable for each serial port to connect the port with the remote device or network

2-8Cisco 4000 Series Installation Guide