Cisco Systems 6.x and 7.0 About Installing the Plug-In by Pulling it from the Server, Procedure

2How to Install Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging

There are two ways that end users can access Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging: by the end user “pulling” it from the server or by having the server “push” it to the end user.

•About Installing the Plug-In by Pulling it from the Server, page 3

•Installing the Plug-In by Pushing it to End Users, page 3

About Installing the Plug-In by Pulling it from the Server

Note We recommend using this method if installing Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging is optional for your end users. If installation is mandatory, we recommend that you push the plug-in to them as described in the following section.

End users can pull the plug-in from the server and install it themselves. To facilitate this, provide them with the following:

•The Quick Start Guide for Installing and Using Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging. This guide describes how to install, configure, and use Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging.

•The http path, discussed in the “Configuring the Update Site to Host Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging on your IBM Lotus Domino Server” section on page 2.

Installing the Plug-In by Pushing it to End Users

•Configuring the Update Site in IBM Domino Administrator, page 3

•Configuring the Update Site in the IBM Lotus Sametime Web Server, page 4

Configuring the Update Site in IBM Domino Administrator

Before You Begin

Log into IBM Domino Administrator.

Procedure

Step 1 Select the tab for the domain that you are configuring.

Step 2 Select the Files tab.

Step 3 Open the Sametime configuration called stconfig.nsf by double-clicking on it.

Step 4 Open the Community Client configuration by double-clicking on the date.

Step 5 Enter the http path to the Update Site, as described in the “Configuring the Update Site to Host Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging on your IBM Lotus Domino Server” section on page 2, into the URL for UIM Provisioning field.

Step 6 Click Close > Save.

3