Cisco Systems 8485DVB Prepare the Remote Control to Operate Your TV (Optional)

Prepare the Remote Control to Operate Your TV (Optional)

The remote control is preprogrammed to operate the PVR. If you want the PVR remote control to operate

your TV also, you can programme the PVR remote control. In the TV Codes section of this guide, locate your

TV brand and the associated code number. If there are several codes listed, begin with the ﬁ rst number and

follow these instructions.

Tips:

• Find the 3-digit code for your TV brand at the end of this guide.

• Press the Mode key on the remote control to switch between operating the PVR and the TV.

• In TV mode, the remote can control TV volume and TV on/off.

T13735

1. Turn on the TV.

2. Press the Mode key on the remote control until

the red LED on the Power key ﬂ ashes twice.

3. Within 5 seconds, enter the 3-digit TV code.

The red LED will ﬂ ash twice to indicate that the

code is accepted.

• If the LED lights steadily for 2 seconds after

you enter the TV code, there is a typing error.

4. Point the remote control toward the TV and press

the Power key.

• The TV will go into Stand-By mode.

• If the TV does not go into Stand-By mode,

select a different code from the TV code list

and repeat steps 1 and 2.

5. Press the Mode key on the remote control until

the red LED on the Power key ﬂ ashes twice.

6. Press 000 on the remote control to unlock your

TV code.

7. Test all the function keys on the remote control.

• If the function keys do not work correctly,

repeat the process using a different TV code.

Tip: If this method does not work, use the All

Code Scan Method to ﬁ nd out which code your

remote control uses to operate your TV.