178

179

Analog Voice Interface Cards continued
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
Cisco Interface Cards

VIC-4FXS/DID

Four-port FXS Voice/Fax
Interface Card
FXS port is used to
connect directly to phones,
fax machines, and key
systems Generates
battery polarity reversal
and caller ID
Modular Router Solutions
Voice and Fax Integration
3800 Series–123(11)T
2800 Series–123(8)T4
When used in a Cisco 2800
or 3800 router, requires a
DSP module
123 Mainline and forward
supported in IP Voice
feature set

ISDN BRI Voice Interface Cards

Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments

VIC2-2BRI-NT/TE

Two-port BRI Voice/Fax
Interface Card
This two-port ISDN
terminal-side or network-
side Basic Rate Interface
(BRI) voice interface
card connects directly to
PSTNs and PBX/PABXs
and supports both on-
premise and off-premise
connections Supports a
total of four voice channels
in a single interface card
via two RJ-45 physical
ports, and enables
toll-bypass and voice-over-
packet features
Modular Router Solutions
Voice and Fax Integration
3800 Series–123(11)T
2800 Series–123(8)T4
When used in a Cisco 2800
or 3800 router, requires a
DSP module
123 Mainline and forward
supported in IP Voice
feature set

VIC2-2FXO

Two-port FXO Voice/Fax
Interface Card (universal
card for all countries)
Also Supports CAMA
(Centralized Automated
Message Accounting) on
Any Port
FXO ports are used to
connect to PBX or key
systems, or to provide
off-premise connections
to PSTN or PTT Supports
battery reversal detection
and caller ID These Cisco
VICs can be software-
congured to work in all
countries Also used to
connect to analog CAMA
trunk to provide dedicated
E-911 service (North
America only)
Modular Router Solutions
Voice and Fax Integration
3800 Series–123(11)T
2800 Series–123(8)T4
When used in a Cisco 2800
or 3800 router, requires a
DSP module
123 Mainline and forward
supported in IP Voice
feature set

VIC2-4FXO

Four-port FXO Voice/Fax
Interface Card (universal
card for all countries)
Also Supports CAMA
(Centralized Automated
Message Accounting) on
Any Port
FXO ports are used to
connect to PBX or key
systems, or to provide
off-premise connections
to PSTN or PTT Supports
battery reversal detection
and caller ID These Cisco
VICs can be software-
congured to work in all
countries Also used to
connect to analog CAMA
trunk to provide dedicated
E-911 service (North
America only)
Modular Router Solutions
Voice and Fax Integration
3800 Series–123(11)T
2800 Series–123(8)T4
When used in a Cisco 2800
or 3800 router, requires a
DSP module
123 Mainline and forward
supported in IP Voice
feature set

VIC2-2E/M

Two-port E&M Voice/
Fax Interface Card
Also Supports CAMA
(Centralized Automated
Message Accounting)
on Any Port
The two-port E&M voice
interface card for Cisco
voice/fax network modules
is used to connect to
PBX or key system trunk
lines This voice interface
card works with existing
phone and fax equipment
to provide voice and fax
services over IP, and is
compatible with H323
standard for audio- and
videoconferencing
Modular Router Solutions
Voice and Fax Integration
3800 Series–123(11)T
2800 Series–123(8)T4
When used in a Cisco 2800
or 3800 router, requires a
DSP module
123 Mainline and forward
supported in IP Voice
feature set
Analog Voice Interface Cards continued
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
Cisco Interface Cards