Installing the Antenna

A drill

A #29 (0.136-in. (s.45 mm)) drill bit (for drywall installation, other surfaces may require a different size).

A pencil

A small mallet or hammer

Mounting on a Vertical Surface

Follow these steps to mount your antenna on a vertical surface. This procedure describes mounting the antenna on a drywall surface. If you are mounting the antenna on any other type of surface, your procedure may vary slightly.

Step 1 Determine the location where you will mount the antenna.

Step 2 Use the antenna as a template to mark the location of the four mounting holes.

Step 3 Use a drill and #29 drill bit to drill four holes at the locations you marked in Step 2.

Step 4 Start a plastic anchor into each hole.

Step 5 Use a mallet or small hammer to seat the anchors into the wall.

Step 6 Align the antenna’s mounting holes with the anchors.

Step 7 Start a #8 x 1¼ screw into each antenna mounting hole.

Step 8 Use a Phillips screwdriver to secure the antenna to the wall. Do not overtighten.

Step 9 Install the end caps into the antenna mounting holes.

Step 10 Remove the yellow outdoor installation warning label from the antenna radome.

Outdoor Installations

You can mount this antenna outdoors. If you mount the antenna outdoors, you must provide the mounting hardware. For outdoor installations, follow the instructions printed on the back of the antenna.

Caution An orientation arrow is printed on the back of the antenna that indicates the proper orientation for the antenna for outdoor installations. You must install the antenna so the arrow points up to prevent any water intrusion and to provide a drain for any moisture that may accumulate inside the antenna.

Cisco Aironet 2.4-GHz/5-GHz MIMO 4-Element Patch Antenna (AIR-ANT2566P4W-R)

 

78-20578-01

7

 

 

 

Page 7
Image 7
Cisco Systems AIRANT2566P4WR specifications Mounting on a Vertical Surface, Outdoor Installations

AIRANT2566P4WR specifications

The Cisco Systems AIRANT2566P4WR is an advanced antenna designed for wireless communication. It primarily targets deployment in corporate environments where high-bandwidth connectivity and robust performance are essential. This antenna is engineered to enhance the performance of Cisco’s access points, providing reliable wireless coverage to support various applications and devices.

One of the main features of the AIRANT2566P4WR is its dual-band capability. It operates effectively on both the 2.4 GHz and 5 GHz frequency bands, allowing seamless integration into existing wireless networks. This dual-band functionality is critical for organizations looking to support a vast array of devices, from older 2.4 GHz equipment to newer 5 GHz devices that require higher bandwidth.

The AIRANT2566P4WR also provides a significant gain of 6 dBi in the 2.4 GHz band and 6 dBi in the 5 GHz band. This enhanced gain allows for extended range and improved signal reliability, ensuring that users can maintain stable connectivity even at longer distances from the access points. This is particularly beneficial in expansive spaces, such as warehouses, auditoriums, or large office campuses.

Another characteristic of this antenna is its multi-polarized design, which minimizes fading and provides consistent performance by addressing various environmental factors. This can be essential in environments where interference might degrade signal quality. The antenna's robust construction ensures durability in various weather conditions, making it suitable for both indoor and outdoor applications.

The AIRANT2566P4WR supports 802.11ac and 802.11n standards, allowing for high-speed data transmission essential for applications such as video streaming, online collaboration tools, and voice over IP services. These features position it well for businesses that require a reliable backbone for their communication infrastructure.

Easy installation is another advantage of the AIRANT2566P4WR. Its design typically includes mounting options that simplify integration with various types of access points, leading to reduced deployment time and lower costs.

Overall, the Cisco Systems AIRANT2566P4WR stands out for its versatile functionality, high performance, and reliability, making it an excellent choice for organizations aiming to enhance their wireless capabilities. Its robust performance, dual-band operation, and dual polarity design combine to deliver a better user experience and a strong wireless network foundation.