Cisco Systems AT6400 manual Where Do I Start?, What If None of the Codes Work?, Quick Reference

			TV	OWE			DVD
				P	R
	STB							AUX
			RE	W			F
ECOR							F
							V/VIDE
R		D
							T	O
			STOP	PAUSE			PLAY
				K		S
			AC				KIP
			B
				MENU			VOD
		PHONE					ONIDEMAND
		ORDI		MENU			IVE T
	C		NG				L	V
	E		S
	R		DVR
	EXIT						INFO
				INTERACT
			SEARCH			MULTISCREEN
				GUIDE
VOL				GUIDE				CH
								PG
				MUTE		JUMP
				MUTE		JUMP

1 2 3

ABCDEF

4 5 6

GHIJKLMNO

7 8 9

PQRS TUV WXYZ

0#

CLEAR SPACE ENTER

AT6400 AllTouch

IR Universal

Remote Control

User Guide

Where Do I Start?

Before you begin using your remote, complete the following initial setup tasks.

Install the Batteries

The remote requires two AA batteries (alkaline recommended).Adiagram in the battery compartment of the remote indicates proper placement of the batteries. When batteries are properly installed, the light on the remote blinks each time a key is pressed.

Visit the Quick Reference Section

Use the Quick Reference section of this guide to familiarize yourself with the remote and the functions of its various keys. Knowing the function and location of the keys on the remote will assist you when you are programming the remote.

Program the Remote

To learn how to program your remote, refer to the sections What Devices Can I Control, What Devices Do I Want to Control, and Program the Remote to Control My Devices for further instructions.

Find a Place to Store Your Remote

Keeping up with one remote is much easier than keeping up with four or five remotes. However, it is still a good idea to find a storage location for your remote. The AT6400 is not a toy. It should be kept out of the reach of children under the age of 6 years.

Program the Remote to Control My Devices

Your remote is initially programmed to only operate your set-top. You will need to set up the remote to operate your other devices using its TV, DVD, and AUX modes. The TV key may be programmed to operate a standard or high-definition television (HDTV). The DVD key may be programmed to operate a DVD player. The AUX key may be programmed to operate a VCR, a receiver, an amplifier, or a Home Theater in a Box (HTIB) system. If the remote provides only limited functionality for a device, you can look for a code that provides more functionality.

Refer to the code tables at the end of this guide to locate additional programming codes.

Note: You have the option to assign some remote keys to operate one device type only. For example, you may want to assign volume control to the TV only. If this is the case, you can reprogram power, volume, and channel control using procedures found later in this guide.

Assigning a Device Code to a Mode Key

1.Refer to the code tables at the end of this guide to locate the information for the device you want to program.

Note: If your device is not listed, you may be able to program the remote using theAuto-Search function. Go to What If None of the Codes Work for instructions.

2.Turn on the device that you want to assign to a mode key.

3.Press and hold the appropriate mode key (TV, DVD, or AUX) on the remote, and then press and hold the OK key.

4.Release both keys and the mode keys blink twice.

5.Enter the first 4-digit setup code for the device using the numeric keys (0-9) on the remote. The mode key blinks three times to indicate that the code entry was accepted.

Notes:

•When an invalid code is entered, the selected mode key displays a long flash to indicate that you have not entered the code correctly.

•Should the remote time-out before you complete the code setup, you must start over. This is indicated by one long flash of the red LED.

6.Point the remote at the device, and press POWER to test the device.

7.Did the device power off?

•If yes, write this code number in the table found in this guide. You may need it again if the device code is accidentally erased.

•If no, repeat this procedure from step 3 using a different setup code.

Note: If none of the codes listed for your brand of device operate the device correctly, go to What If None of the Codes Work for instructions.

8.Repeat this procedure for each mode key you want to program.

What If None of the Codes Work?

If none of the codes listed for your brand of device operate the device correctly, or if your device is not listed in the codes table, you can use the Auto-Search function to search through the code library for a valid code. This section provides procedures for using the Auto-Search function to search the code library for TV, DVD and AUX mode codes.

Note: Read the procedures in this section thoroughly before beginning. You need to be prepared to observe the behavior of the remote.

Auto-Search Features

Consider the following items when using Auto- Search:

•The Auto-Search function begins searching from the first code.

•If a valid code is not found, the green backlight blinks twice and the remote returns to normal operation.

•If any other key is pressed except PLAY, ENTER, POWER, EXIT, REW, FF, or numeric keys 1 through 4 (when programming the AUX mode key), the mode key displays a long red flash (error message) and the remote returns to normal operation.

•Should the remote time-out before you complete the Auto-Search function you must start over. This is indicated by one long flash of the red LED.

•If the device is not listed and the Auto-Search function is unable to find a usable code, you may need to use the original remote provided with the device.

Auto-Searching the Code Library for TV or DVD Mode Codes (Program Code 922)

Note: This procedure only applies to TVs and DVDs.

1.Turn on the device you that you want to assign to the TV or DVD key.

2.Point the remote at the device.

3.Press and while holding a selected mode key (TV or DVD), press the OK key. For example, to search for a TV code, press and hold TV and OK at the same time.

4.Release both keys and all the mode keys blink twice.

5.Enter the programming code 9 2 2 by pressing the numeric keys on the remote. The mode key you selected in step 3 blinks twice to indicate a successful entry.

6.Point the remote toward the device, and press PLAY.

7.Your device powers off when it finds the correct code. Then, choose one of the following options:

•Save code and exit – Press the ENTER key on the remote to program the code in the remote and the mode key flashes three times indicating successful entry.

•Step forward – Press the fast-forward (FF) key on the remote to step ahead through the codes one at a time. Then, return to step 6.

•Step backward – Press the rewind (REW) key on the remote to step back through the codes one at a time. Then, return to step 6.

•Exit without saving the code – Press the EXIT key on the remote. The selected mode key flashes three times and returns to normal operation.

•Send the current code – Press the POWER key on the remote to send the current code. If the device turns back on, press the ENTER key. If the device does not turn on, return to step 6.

•Continue with auto-search function – Press the PLAY key on the remote to continue with the auto- search function. Then, return to step 6.

Auto-Searching the Code Library for AUX Mode Codes (Program Code 922)

1.Turn on the device that you want to assign to the AUX key.

2.Point the remote at the device.

3.Press and while holding the AUX key, press the OK key.

4.Release both the AUX key and the OK key and all the mode keys blink twice.

5.Enter the programming code 9 2 2 by pressing the numeric keys on the remote. The AUX key blinks twice indicating a successful entry.

6.Press the PLAY key, choose one of the following device categories and then, using the number keys on the remote, press its assigned number (1 – 4) based on the following list:

1	= VCRs	2	= Receiver/Tuners
3	= Amplifiers	4	= HTIB

Note: The device categories are number-coded to provide a more direct programming method.

7.Point the remote toward the device, and press PLAY.

8.Your device powers off when it finds the correct code. Then, choose one of the following options:

•Save code and exit – Press the ENTER key on the remote to program the code in the remote and the mode key flashes three times indicating successful entry.

•Step forward – Press the fast-forward (FF) key on the remote to step ahead through the codes one at a time. Then, return to step 7.

•Step backward – Press the rewind (REW) key on the remote to step back through the codes one at a time. Then, return to step 7.

•Exit without saving the code – Press the EXIT key on the remote. The selected mode key flashes three times and returns to normal operation.

•Send the current code – Press the POWER key on the remote to send the current code. If the device turns back on, press the ENTER key. If the device does not turn on, return to step 7.

•Continue with auto-search function – Press the PLAY key on the remote to continue with the auto- search function. Then, return to step 7.

Reassign Mode Keys

You can reassign a mode key to operate a different device. For example, you can reassign the AUX key to operate a DVD player or a TV. If you reassign a key, be sure you update the table found in this guide.

Reassigning Mode Keys

(Program Code 944)

1.Press and hold the STB mode key on the remote.

2.Without releasing the STB key, press and hold the OK key.

3.Release both the keys and all mode keys flash twice.

4.Enter the programming code 9 4 4 by pressing the numeric keys on the remote. The STB mode key blinks twice indicating a successful entry.

5.Press and release the mode key associated with the type of device you want to control, and then press and release the mode key that you want to change. The newly assigned mode key blinks one time indicating a successful entry.

Some common examples:

•To program the AUX key to operate your DVD player, press DVD and then AUX.

•To program the DVD key to operate your TV, press TV and then DVD.

Change Volume Control

By default, once the TV mode key is programmed with a valid code, the volume and mute buttons control your TV. These keys adjust the volume of your TV higher, lower, or temporarily switch the volume off (Mute), regardless of whether the remote is in STB, TV, DVD, or AUX mode.

If you prefer, you can choose to have the volume and mute buttons always control a different device rather than your TV, such as a home theater receiver. (See Controlling Volume for One Device below.) Note that you must first program one of the mode keys, such as AUX, with a valid code for that device.

Alternatively, you can choose to have the volume and mute buttons control different devices when the remote is in different modes. For example, you might want to control the volume on your TV when in TV mode, but the volume on your home theater receiver when in AUX mode. (See Controlling Volume for Different Devices below.) Note that not all devices have volume controls, so if you choose this option, the volume and mute buttons may do nothing in some modes, such as STB and DVD.

Controlling Volume for One Device (Program Code 955)

1.Press and hold the STB mode key on the remote.

2.Without releasing the STB key, press and hold the OK key.

3.Release both keys and all mode keys blink twice.

4.Enter the programming code 9 5 5 by pressing the number keys on the remote. The STB mode key blinks twice indicating a successful entry.

5.Press and release the mode key for the device you want the volume keys to control. For example, if you want to control volume through your TV, press and release TV. The selected mode key blinks three times to indicate a successful entry.

The volume keys now control only one device whether you are in STB, TV, DVD, or AUX mode.

Controlling Volume for Different Devices (Program Code 955)

The channel key now always controls the device associated with the mode you selected in this procedure, whether in STB, TV, DVD, or AUX mode.

Controlling Channels for Different Devices (Program Code 966)

1.Complete steps 1 through 4 of the Controlling Channels for One Device procedure.

2.Press and release the Enter key. The STB mode key blinks three times to indicate a successful entry.

After you press the Enter key, the channel key now controls the device associated with the mode key you select. For example, in TV mode, the channel key controls the TV, but in STB mode, the channel key controls the set-top.

Notes:

•If any other key is pressed except the Mode keys and the ENTER key, the remote does not accept any changes or updates. The STB mode key displays a long red flash and the remote returns to normal operation.

•If the remote times out before you complete programming channel selection control, the remote does not accept any changes. You must start over from step 1 of this procedure.

Change Power Control

The POWER key on the remote is set by default to control the power switch on one device at a time, in either mode (STB, TV, DVD, or AUX). When in STB mode, the remote switches the set-top from OFF (standby mode) to ON, or from ON to OFF (standby mode). However, you can alternatively program the POWER key to control the power switch on up to four devices at the same time, instead of controlling one device at a time. It is highly recommended that you set up the POWER key to turn on and off your set-top and your TV at the same time. Turning off the set-top saves electricity and extends the life of the box. When turned off, the set-top can still record scheduled programs on its DVR and perform any other necessary functions.

Controlling Power for Multiple Devices at Once (Program Code 977)

1.	Press and hold the STB mode key on the remote.
2.	Without releasing the STB key, press and hold the
	OK key.

Welcome to the Ultimate Control Experience

Your new AT6400 AllTouch® Infrared (IR) Universal Remote Control (remote) is a true universal remote, functioning as four remotes in one. As one example, you can use this remote to operate your set-top, your TV, and two other devices, such as a DVD player and VCR.

Important Information About Your Remote

Your remote is initially programmed to only operate your set-top. Therefore, you must program the remote to operate your TV, VCR, or other devices. See Program the Remote to Control My

Quick Reference

	TV		OWE	DVD			Device
			P R
STB					AUX
	RE	W		FF			Control
ECOR				V/VIDE
R	D						DVR/VOD/
				T		O
	STOP		PAUSE	PLAY
							DVD/VCR
	ACK			SKIP			Control
	B
			MENU	VOD
	PHONE			ONIDEMAND			Viewing
CORDING			MENU	E	TV
				LIV
RE	S
	DVR						and
							Browsing
							Control
	EXIT			INFO

Device Control

POWER

Turns devices on or off

STB

Enables set-top mode functions

TV

Enables TV mode functions

DVD

Enables DVD mode functions

AUX

Enables AUX mode functions

DVR, VOD, DVD, VCR Control

Notes:

• In STB mode, these keys control DVR and VOD

Viewing and Browsing Control

		Phone		Accesses the phone menu
		MENU		Accesses the Interactive Program Guide
				(IPG)
O			D	Accesses the On Demand menu
		VOD
	NID EMAN
		ORDIN
	C		G	Accesses the DVR list of recordings
E		DVR	S
R
		LIVEITV		Views live TV

Moves through selections

Sound Control

Note: These keys are assigned to the TV when the TV mode key is programmed with a valid code.

VOLAdjusts volume

MUTE Mutes sound

Numeric Keys

1	2	3	Enters channel numbers, text, and
	ABC	DEF
4	5	6	remote codes. Also use to enter your
7	8	9
GHI	JKL	MNO	parental control PIN
PQRS	0	WXYZ
	TUV

SPACE

Clears text and numbers in text fields

CLEAR

LED Indicators

There are red LEDs underneath each of the four mode keys (STB, TV, DVD, and AUX) that flash each time a key is pressed to show which device the key is currently controlling.

There are also green LEDs that illuminate several keys whenever the remote is in use. They stay illuminated for a short time after a key is pressed.

During programming, if the remote times out before you complete the code setup, you will need to start over. This is indicated by one long flash of the red LED.

What Devices Do I Want to Control?

1.Complete steps 1 through 4 of the Controlling Volume for One Device procedure.

2.Press and release the Enter key. The STB mode key blinks three times to indicate a successful entry.

After you press the Enter key, the volume keys control the device assigned to that mode. For example, in TV mode, the volume keys control volume for the TV only.

Notes:

•If any other key is pressed except the Mode keys and the ENTER key, the remote does not accept any changes or updates. The STB mode key displays a long red flash and the remote returns to normal operation.

•If the remote times out before you complete programming volume control, the remote does not accept any changes. You must start over from step 1 of this procedure.

Change Channel Control

3.	Release both keys and all mode keys blink twice.
4.	Enter the programming code 9 7 7 by pressing the
	numeric keys on the remote. The STB mode key
	blinks twice to indicate a successful entry.
5.	For the first device, press the STB key. The STB
	mode key blinks twice.
6.	For the second device, press the applicable mode
	key (TV, DVD, or AUX). The selected mode key
	blinks twice.
7.	Repeat step 6 for up to two more devices (total of
	four devices).
8.	Press the ENTER key to complete the power switch
	control programming. The last selected mode key
	blinks 3 times to indicate a successful entry.

Example: In an example scenario where you press only TV in steps 6 and 7, the POWER key controls both the set-top and the TV at the same time, regardless of which mode the remote is in (STB, TV, DVD, or AUX).

Devices to learn how to enter device codes and program your remote.

Note: You must use the IR remote within line of sight of the set-top to operate the set-top correctly.

How Does A Universal Remote Control Work?

You tell the remote which type of device you want to operate using the four keys arched across the top of the remote. These keys, known as mode keys, are labeled STB, TV, DVD, and AUX.

		INTERACT
	SEARCH		MULTISCREEN
Sound		GUIDE
Control	VOL	GUIDE		CH
		MUTE	JUMP	PG
		MUTE	JUMP
	1	2	3
		ABC	DEF	Numeric
	4	5	6
	GHI	JKL	MNO	Keys
	7	8	9
	PQRS	TUV	WXYZ
Clear		0	#	Enter
	CLEAR	SPACE	ENTER

functions.

• In DVD and AUX modes, these keys may control

your DVD or VCR depending on how you have

programmed the remote.

ECOR
R	D
	Records the selected program
STOP
	Stops DVD, VCR, VOD, or DVR content
PAUSE
	Pauses DVD, VCR, VOD, or DVR content
PLAY	Plays DVD, VCR, VOD, or DVR content

EXIT

SEARCH

INTERACT

MULTISCREEN

Selects and deselects screen items

Clears all menu screens and returns to broadcast TV

Accesses the Search menu

Accesses INTERACT content (Internet and interactive content)

Turns MultiScreen mode on or off

#Enters and saves (stores) an entry

ENTER

What Devices Can I Control?

The four mode keys arched across the top of the remote tell the remote which device you want to operate.

	O	W
TV		ER	DVD
	P
STB			AUX

T12121

To help you keep track of the devices you want to control, list the type of devices you have (including brand) in the following table. Then, use the code tables at the end of this guide to locate the codes for your device. For example, look under TV Group if you need to program the remote to operate your TV. If you have two devices that use the same key, you must reassign the TV, DVD, or the AUX key. The STB key cannot be reassigned. Go to Reassign Mode Keys. Otherwise, go to Program the Remote to Control My Devices for additional instructions.

Mode	Device	Brand Code
Key	Type

The remote is set by default to control channel selection on the set-top. You can also program channel control to control any of the TV, DVD, or AUX mode devices provided the device allows for channel control assignment. Or, you can set the channel selection control programming to control channels (or page up or down) for all of the devices programmed in the four mode keys. Otherwise, you can only control channels (or page up or down) on a specific device, for example, the TV or DVD.

Note: The channel control keys include CH/Page, Jump, and the numeric keys 0 through 9.

Controlling Channels for One Device

Controlling Power for One Device at a Time (Program Code 977)

1.Complete steps 1 through 4 of the Controlling Power for Multiple Devices at Once procedure.

2.Press the ENTER key to complete the power switch control programming. The last selected mode key blinks 3 times to indicate a successful entry.

After you select a mode, the POWER key controls the device assigned to that mode. For example, in TV mode, the remote controls power for the TV only.

Notes:

• If any other key is pressed except the Mode keys

and the ENTER key, the remote does not accept

Each mode key is associated with a specific device. As an example, after programming the remote, if you want the remote to operate your TV, you simply press the TV key. Other keys you press on the remote, thereafter, should operate your TV. Want to switch the remote to operate a different device? Just press the mode key for the next device you want to operate. In this guide, you will learn which types of devices you can control and how to program the remote to control your specific devices.

T13264

V/VIDE		Scrolls through available TV or video input
T	O
		sources
REW		FF	Rewinds or fast forwards through
			DVR or VOD content
BA CK		SKIP	Skips backward or forward through

DVR or VOD content

IN	Displays text information about the selected
FO
	program
GUIDE	Displays or closes the IPG
JUMP	Jumps to next section or switches to last
	channel viewed

Selects the next channel, up or down, when CH watching TV. Moves up or down one page

PG

in the IPG and in some menu screens

Each mode key is associated with different types of devices. You can use each mode key to control one of its associated devices:

Mode Key	Associated Devices
STB	IP gateway set-top
TV*	TVs (including HDTVs)
DVD*	DVD players
AUX*	VCRs, receivers, tuners, and Home
	Theater in a Box (HTIB)

*These keys can be reassigned to control different devices. Go to the Reassign Mode Keys section of

this guide for instructions.

Example:	DVD Sony 2066
DVD
TV
DVD
AUX

(Program Code 966)

1.Press and hold the STB mode key on the remote.

2.Without releasing the STB key, press and hold the OK key.

3.Release both keys and all mode keys blink twice.

4.Enter the programming code 9 6 6 by pressing the numeric keys on the remote. The STB mode key blinks twice to indicate a successful entry.

5.Press and release the mode key for the device you want the channel key to control. For example, if you want to control channels on your TV, press and release TV. The selected mode key blinks three times to indicate a successful entry.

any changes or updates. The STB mode key

displays a long red flash and the remote returns to

normal operation.

• If the remote times out before you complete

programming power switch control, the remote does

not accept any changes. You must start over from

step 1 of this procedure.