Cisco Systems C9800 GA, C9800HDN, C9800HDTN manual 137

66-3 Setting the WebLink destination

Setting the WebLink destination

You can change the pre-set WebLink destination; this function requires the Administrator password, if one has been set.

TO CHANGE THE WEBLINK DESTINATION

1.Start your Internet browser.

2.Enter the IP address or the DNS name of the Fiery.

The Fiery home page appears.

3.Enter the Administrator password, if required, and click OK.

4.Press the Ctrl key as you click WebLink.

The Update WebLink dialog box appears.

5.Enter the new WebLink address (URL) and click OK.