Configuring a NetWare server for printing with NDPS
Before you begin
The following procedure assumes NDPS has been installed during NetWare 5.x or later installation and that a Broker is running on the server. Unless you have manually unloaded the Broker, it loads and runs when you install NDPS. Make sure you are using the latest NetWare service pack and Novell gateway. Finally, create an NDPS Manager. For more information, see your NetWare documentation.
In Fiery Setup, make sure you have enabled TCP/IP and LPD printing on the Fiery. You can ping the Fiery to verify that TCP/IP communication is successful.
Setting up the Fiery printer driver
You first need to create a directory for Windows NT 4.0/2000/XP/Server 2003 or a folder for Windows 98/Me in the NetWare server for NDPS to install the corresponding printer driver files from the User Software CD.
TO SET UP THE PRINTER DRIVER FOR WINDOWS NT 4.0/2000/SERVER 2003
1.Log on to the Novell file server as a superuser or Administrator.
2.Create a directory called Fiery in the following location: SYS:ndps\resdir\Prndrv\NT4 for Windows NT 4.0 SYS:ndps\resdir\Prndrv\2000 for Windows 2000 SYS:ndps\resdir\Prndrv\XP for Windows XP SYS:ndps\resdir\Prndrv\Server 2003 for Windows Server 2003
3.From the C9800 Driver CD, copy the contents of the following folder to the Fiery directory:
DRIVERS\ENGLISH\NT40\PS for Windows NT 4.0 DRIVERS\ENGLISH\WIN2K_XP\PS for Windows 2000 DRIVERS\ENGLISH\WIN2K_XP\PS for Windows XP and Windows Server 2003"