44-8 Performing Setup from the Control Panel

The available network types, and the Setup areas that pertain to them, are summarized in the following table.

For this Network or

Use this

Use this Protocol Setup

Use this Service Setup

Connection Type

Port Setup

 

 

 

 

 

 

AppleTalk over Ethernet

Ethernet Setup

AppleTalk Setup

AppleTalk printing (PAP) is

 

 

 

enabled automatically.

 

 

 

 

TCP/IP over Ethernet

Ethernet Setup

TCP/IP Setup: Ethernet Setup

LPD Setup

 

 

 

Web Services Setup

 

 

 

Windows Setup

 

 

 

Port 9100 Setup

 

 

 

IPP Setup

 

 

 

 

IPX/SPX over Ethernet

Ethernet Setup

IPX/SPX Setup

PServer Setup (NDS, Bindery,

 

 

 

or both)

 

 

 

 

Parallel

Parallel Port Setup

—

—

 

 

 

 

TO ACCESS NETWORK SETUP OPTIONS

1.Confirm that the network cable is connected to the Fiery.

During Network Setup, the Fiery queries the network for zones, servers, and server-based queues. If you perform Network Setup without a connected and functioning network, default settings are used that may not meet your needs.

2.Choose Network Setup from the main Setup menu as described on page 4-3.

3.Choose Port Setup from the Network Setup menu.

4.To use Ethernet, choose Ethernet Setup from the Port Setup menu, and enter the appropriate settings.

5.To print to the parallel port, choose Parallel Port Setup from the Port Setup menu, and enter the appropriate settings.

6.When you have finished entering port settings, choose Exit Port Setup, and then choose Protocol Setup.

7.Enter the appropriate settings for the protocol or protocols you will use.