IP Address [127.0.0.1]
Enter the Fiery IP address for Ethernet. This IP address, unlike an IP address set auto- matically, remains the same if you restart the Fiery. You must change the default to a valid address for your network. For information about setting up printing with TCP/IP, see Chapter 2.
Subnet Mask
This option lets you modify the subnet mask for printing with TCP/IP over Ethernet. To set the subnet mask, enter one of the following values:
•255.0.0.0 if the IP address starts with a number less than 128
•255.255.0.0 if the IP address starts with a number from 128 through 191
•255.255.255.0 if the IP address starts with a number greater than 191
NOTE: Confirm the subnet mask setting with your network administrator before proceeding. In some cases, the required setting may be different from that listed.
Gateway Address [127.0.0.1]
This option appears only if you answered No to Auto Gateway Address.
Use this option to set the gateway address for printing with TCP/IP. If your network uses a gateway, you must change the default to a correct gateway address for
your network.