4-5

2. Setup Menu Procedures
Setup Menu Settings Chapter 4
Operating the Setup Menu
The Setup menu is accessed in the following sequence: Menu selection → Set key → Submenu
selection → Set key → Select the desired setting menu and change the setting.
Refer to the section “Setup Menu Transition Diagram” (☞ p. 4-11) for an illustration of the menu
hierarchy and the items that can be set.
(1) Use the ▼ and ▲ keys to select the main menu.
(2) Press the Set key. The submenu of the selected main menu (Level 1) is displayed. There may be no
submenu depending on the main menu that is se lected and the setting items may be displa yed
instead (☞ p. 4-11).
This example explains the condition when [Network Setup] is selected from the main menu.
If the Set key is pressed by mistake, press the Cancel key to return to the previous menu.
(3) Use the ▼ and ▲ keys to select the submenu (Level 1)
Setup
EXIT
Setup
Server Setup
▲
▲
▼
▼
(Next menu)
Setup
Network Setup
▲▼
Setup
Network Setup
Set key Network Setup
EXIT
Network Setup
EXIT
Network Setup
Port Setup
▲
▲
▼
▼
(Next menu)
Network Setup
Protocol Setup
▲▼