1-25
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Chapter 1 Product Overview
Alarm Card, Line Card, and Rout Processor Overview
Figure 1-13 Gigabit Route Processor Front Panel
GRP PCMCIA Card Slots and Status LEDs
Two PCMCIA card slots (slot 0 and slot 1) provide the GRP with additional flash
memory capacity or other input/output (I/O) device capability.
Caution The GRP only supports +5.2 VDC Type I and Type II devices. It does not support
+3.3 VDC PCMCIA devices.
Status LEDs (Slot-0/Slot-1) indicate when the flash memory card or I/O device in
that slot is accessed. Each slot has an eject button to remove the card from the slot
(Figure 1-14).
1PCMCIA flash card slots, eject buttons, and
slot LEDs
5RJ-45 Ethernet port and data status LEDs
2Reset button 6MII Ethernet connection
3Auxiliary serial port 7Alphanumeric message displays
4Console serial port
SLOT-0
GIGABIT ROUTE PROCESSOR
SLOT-1
COLL
LINK
TX
RX
RJ-45
MII
RESET
AUX
CONSOLE
EJECT
129306
1 432 5 6 7