2-13
Cisco 7204 Installation and Configuration Guide
OL-5101-02
Chapter2 Preparing for Installation Checking the Shipping Container Contents
Checking the Shipping Container Contents
Once you receive your Cisco 7204 router, use the following procedure to check the contents of the
shipping container. Use the “Cisco 7204 Installation Checklist” in Table 2- 2 and the “Cisco 7204
Component List” in Tabl e 2-3 to ensure you received all the components you orde red.
Note Do not discard the shipping container. You will need the container if you move or ship the Cisco 7204
in the future.
Step1 Verify that the following are included in the shipping container (the accessories box might be separa te):
•One Cisco 7204 router, fully assembled (except the rack-mount and cable-management kit)
•One or more accessories boxes (some or all may be shipped separate ly)
Step2 Check the contents of the accessories box against the Installation Checkl ist and the packing slip to verify
that you received all listed equipment, which should include the following:
•One modular power cable for each AC-input power supply
•One rack-mount and cable-management kit (four brackets a nd 1 4 m oun tin g s crews)
•Optional equipment that you ordered, such as network interface cables, transceivers, or special
connectors
•Cisco 7204 hardware and software documentation, if ordered
Note We no longer ship the entire router documentation set automatically with each system. You must
specifically order the documentation as part of the sales order. If you ordered documentation an d
did not receive it, we will ship the documents to you within 24 hours. To order documents,
contact a customer service representative.
Step3 Verify that the port adapters installed in your Cisco7204 match the port adapter types on the packing list.
Step4 Proceed to the ““Site Log” section on page 2-14” in this chapter, then to Chapter 3, “Installing the
Cisco 7204”,” to begin the installation.