Cisco Systems IGX 8 appendix General, System Specifications, A P P E N D

A P P E N D I X

A

System Specifications

This appendix contains system specifications.

General

This section provides general system information on the IGX 8.

System Capacity:		1 shelf with 8 card slots.
		Requires 2 dedicated front slot(s) for NPMs.
		Requires 2 dedicated back slots for SCMs (1 slot with blank plate).
		Up to 6 T1/E1 circuit ports.
		Up to 6 T1/E1 packet trunks.
		Up to 48 synchronous data ports.
		Up to 25 Voice, Data, and/or Frame Relay Module groups.
Enclosure Size:		IGX 8 Standalone/Rackmount:
		Height: 25 ins. (63.5 cm) standalone; 24.5 ins. (62.3 cm), rack
		Width: 19.9 ins. (50.5 cm), standalone; 19 ins. (48.3 cm.), rack
		Depth: 26.5 ins. (67.3 cm), standalone and rack-mount
Shipping Weight:		270 pounds (122.7 kilograms)
Clearance Requirement:		Min. clearance: 30 inches front; nominal 30 ins. rear; 12 ins. side.
Power Input Voltage:		AC system: 100 to 240 VAC (90–264 under-voltage and
		over-voltage tolerance), 47 to 63 Hz.
		DC system: –42 to –56 VDC.
		Each AC supply can provide up to 400 watts to the card shelves.
		Space for 4 power supplies.
Current Requirements:		Configuration dependent - use Network Design Tool for exact
		requirements. For planning purposes, use the following:
•	AC System	10 Amps Max. for 110 VAC, 5 A for 220 VAC.
•	DC System	20 Amps max. at –48 VDC; 25 Amps at –42 VDC (worst case)

-1