Cisco Systems OL-12997-01 appendix Router# configure terminal Routerconfig# telephony-service

Chapter B Setting Up and Using a Cisco Unified IP Phone as a Cisco IPICS Push-to-Talk Device

Configuring Cisco IPICS as a Phone Service for Cisco Unified Communications Manager Express

Step 3 (Optional) If you are configuring a service for a user who does not have to log in to use it, configure these parameters in the Service Parameter Information area:

•method—Set this parameter to LOGIN and designate it as required.

•user—Set this parameter to the Cisco IPICS digit ID of the user and designate it as required.

•PIN—Set this parameter to the Cisco IPICS digit password (PIN) of the user and designate it as required.

Configuring Cisco IPICS as a Phone Service for Cisco Unified Communications Manager Express

To configure Cisco IPICS as an available service in Cisco Unified

Communications Manager Express, perform the following procedure:

Procedure

Step 1 Log in to the Cisco IOS router that runs Cisco Unified Communications Manager Express.

Step 2 Type this command to access the enable prompt:

Router> enable

Step 3 Enter the following commands to provision a router that is running Cisco Unified Communications Manager Express with the URL of the Cisco IPICS IP Phone service so that Cisco Unified IP Phones can function as Cisco IPICS PTT devices:

Router# configure terminal

Router(config)# telephony-service

Router(config-telephony)# url services http://

<ipics server IP address>/ipics_server/servlet/IPPhoneManager

(replace ipics server IP address with the IP address of the Cisco IPICS server)

Step 4 Press Ctrl-Zto return to the enable prompt.

	Cisco IPICS Server Administration Guide
B-4	OL-12997-01