Chapter 3: Installation
Placement Options
There are two ways to physically install the Switch, either set the Switch on its four rubber feet for desktop placement or mount the Switch in a
Desktop Placement
When placing the Switch on a desktop, please observe the following guidelines:
•Attach the rubber feet to the recessed areas on the bottom of the Switch.
Gigabit
Link/Act
Gigabit
Link/Act
10/100/1000
Switch Gigabit
SYSTEM
SR2024
| miniGBIC1 | |
miniGBIC2 |
| |
| 12) with | (Shared |
|
| |
24) with | (Shared |
|
|
| |
Attaching the Rubber Feet
•Place the Switch on a desktop near an AC power source.
•Keep enough ventilation space for the switch and check the environmental restrictions mentioned in the Specifications Appendix as you are placing the Switch.
•Connect the Switch to network devices according to the Hardware Installation instructions detailed in this guide.
