8
Lift the Chassis onto the Shelf
8.Place the switch in the rack.
a.Lift the switch (using at least two people). Face the side of the chassis without handles toward the rack.
b.Rest the end of the chassis at the edge of the shelf. Push the chassis back into the rack until the handles meet the rack posts. Make sure that the left and right sides of the chassis are pushed back evenly.
NOTE: There are no side rails for the current Topspin 360 chassis.
Secure the Chassis
9.Attach the chassis handles to the rack posts, using screws that fit your rack.
10.Tighten any screws that you left loose for adjustment.
