WIC−1T One−Port Serial WAN Interface Card Cable Specifications
Document ID: 46793
Introduction
Prerequisites
Requirements
Components Used
Conventions
Overview
Cisco 5−in−1 Cables
Related Information
Introduction
This document provides cable specifications for the WIC−1T one−port WAN interface card.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.
Overview
The WIC−1T features the Cisco 5−in−1 connector which supports several serial protocols (V.35, X.21, RS−232, RS−449, RS−530) when used with the appropriate transition cable. This facilitates easy configuration and re−configuration as network requirements change without the need to purchase a different serial interface card.
Cisco − WIC−1T One−Port Serial WAN Interface Card Cable Specifications
