3.Select the value for pressure for mea- surement
Press the “Pressure Setting Switch” and set the value to a value approximately 20~30mmHg above your normal systolic blood pressure.
There are 4 settings; 130, 160, 200 and 250mmHg.
After press on the “Pressure Setting Switch”, the set pres- sure value will be displayed at the left and the right side of the display.
4. To start the measurement
SELECT
MEMORY
START | POWER |
Press the “Start Switch”.
The arm cuff pressurizes when the “Start Switch” is pressed.
SYSTOLIC mmHg |
| DIASTOLIC mmHg | ||||||
AVE. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | PULSE/min |
| ||||||||
When the pressurization is reached to the set value, air infla- tion is stopped automatically.
SYSTOLIC mmHg |
| DIASTOLIC mmHg | ||||||
AVE. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | PULSE/min |
| ||||||||
When pressurization is completed, the automatic exhaust mechanism will gradually reduce arm cuff pressure, and the mark “Q” appears indicating that measurement is in progress.
- Eng 8 -
