Citizen CH-462E Correcting the minute of an alarm time, Correcting the hour of an alarm time

English

SETTING THE CLOCK

3Correcting the “minute” of an alarm time

•Press “MODE” switch for one second or more to place the unit in the alarm-time minute correction state.

• Press “SET” switch to increase the minute of the alarm time in increments of one minute.

4Correcting the “hour” of an alarm time

•After the completion of the alarm-time minute correction as described above, press “MODE” switch to place the unit in

the alarm-time hour correction state.

• Press “SET” switch to increase the hour of the alarm time in increments of one hour.

5Correcting the “second” of the current time

• After the completion of the alarm-time hour correction as described above, press “MODE” switch to place the unit in the current-time second correction state.

• Press “SET” switch to reset the second indication to 00. Press “SET” switch according to a time signal. Note that the minute indication on the display will advance when the seconds given is 30 to 59 seconds of a minute.

6Correcting the “minute” of the current time

• After the completion of the current-time second correction as

described above, press “MODE” switch to place the unit in the current-time minute correction state.

• Press “SET” switch to increase the minute of the current time in increments of one minute.

- Eng 14 -