NOTE

111 To go to Hex Dump mode additionally, press the Paper Feed button once more.

222 After printing ASCII pattern, the self test will be finished automatically. 333 If the Paper Feed button is not pressed to go to Hex Dump mode, self

test will be finished automatically after 3 seconds.

When the printer is installed initially or when you face a problem, you can run the self test and check the information about

-Firmware version, Emulation, Codepage, sensor setting, interface setting and so on.

After checking with self-test and no issues are found, you can examine other devices and software. This function is working independent of devices and software.

•Motor protection from being overheated

To prevent the motor for overheating, the printer should be stopped for at least 30 seconds after continuously printing a 1.5 metre long receipt.

30