Citizen Systems CBM-910 Type II user manual Country, Character Code Table

(7)Continuous Paper Feed Assignment (ESC + “B” + n) Command

With ESC (1BH) +“B” (42H) + n code input, continuous paper feed at n-dot line is executed.

However, n allows continuous paper feed to be executed at even-numbered dot line in the range of 4 ≤ n ≤ 255. If n is specified otherwise, this command is cancelled.

When this command is entered, print data, if any, in the input buffer is printed. Print line (10-dot line) is included in the amount of line feed “n”; therefore, 4 ≤ n ≤ 9 provides a line space of “0”.

(8)International Character Select (ESC + “R” + n) Command

By entering the code ESC (1BH) + “R” (52H) + n, characters input hereafter are set to the characters for the following countries.

n	Country	n	Country
0	U.S.A. (USA)	5	Sweden (SWE)
1	France (FRA)	6	Italy (ITA)
2	Germany (GER)	7	Spain (SPA)
3	U.K. (U.K)	8	Japan (JPN)
4	Denmark (DEM)

With n other than those specified, the set value for the U.S. is assigned.

Note: At the printer power on or after RESET is applied, this setting differs depending on the status of memory switch setting.

(9)Codepage Select (ESC + “t” + n) Command

By the entry of ESC (1BH) + ”t” (74H) + n code, the follwing character code table can be selected.

n	Character Code Table	n		Character Code Table
0	Codepage PC437	8	Codepage PC857
1	Katakana	9	Codepage WPC1252
2	Codepage PC858	10	Codepage PC864
3	Codepage PC860	11	Codepage PC869
4	Codepage PC863
5	Codepage PC865	253	910	Emulation (Japan)*
6	Codepage PC852	254	910	Emulation (International)*
7	Codepage PC866	255	Space page (for user-defined characters)

*: In the factory setting, character set for model type is 910 Emulation (International) for model F and 910 Emulation (Japan) for model J.

— 37 —