Clarion APX200.2M Power System Amplifier, Introduction, About The Manual And Warranty

APX200.2M Power System Amplifier

INTRODUCTION

The Clarion APX200.2M is a full-featured two-channel amplifier incorporating the following features:

•Full frequency response with low distortion and exceptional signal to noise performance

•Advanced circuit design that features bridgeable and mixed mode operation for use in various systems, including those with satellite speakers and/or subwoofers

•Variable high-pass/low-pass electronic crossover with a 12dB per octave slope and full adjustable range (from 55Hz to 5.5kHz) to aid in audio system design

•Variable bass boost circuit to reinforce low frequency signals that may be lost due to subwoofer box design

•Adjustable input level controls with ground loop isolation accepting a wide range of input signals

•Remote turn-on with "soft start" muting to prevent turn-on "thump"

•Pulse-Width Modulated (PWM) MOSFET power supply with low AM RFI and protection circuits for overheating and speaker shorts

•2-ohm load capability to drive a variety of speaker systems

•Gold-plated input/output connectors and an external automotive type fuse

•Aluminum heat sink for efficient heat dissipation

•Low profile, compact size for space limited installations

ABOUT THE MANUAL AND WARRANTY

To start enjoying your new Clarion two-channel amplifier, please read the instructions listed in this manual. Keep all instructions for future reference.

Please fill out and send in the enclosed warranty card to protect your purchase and aid in warranty service. Also, save your original sales receipt as proof of purchase.

TABLE OF CONTENTS
Description	1
Input Connections and Audio Controls	1
Connections for Power and Speakers	3
Applications	4
Installation	7
Mounting Precautions	7
Wiring Precautions	7
Setting the Gain	10
Setting the Crossover	10
Setting the Bass Boost	10
Final System Checks	11
Troubleshooting	11
Product Specs	12
Notes	13