Clarion DB166 8. IN CASE OF DIFFICULTY, 9. ERROR DISPLAYS

English

8. IN CASE OF DIFFICULTY

	Problem	Cause	Measure
	Power does not turn	Fuse is blown.	Replace with a fuse of the same amperage. If
	on.		the fuse blows again, consult your store of
	(No sound is pro-		purchase.
	duced.)
		Incorrect wiring.	Consult your store of purchase.
General
	pressed.	etc.	button and remove the
	Nothing happens	The microprocessor has	Turn off the power, then
	when buttons are	malfunctioned due to noise,	press the [RELEASE]
			DCP.
	Display is not accu-		Press the reset button for
	rate.		about 2 seconds with a
			thin rod.
			Reset button
		DCP or main unit connec-	Wipe the dirt off with a soft cloth moistened with
		tors are dirty.	cleaning alcohol.
	Compact disc cannot	Another compact disc is al-	Eject the compact disc before loading the new
	be loaded.	ready loaded.	one.
	Sound skips or is noi-	Compact disc is dirty.	Clean the compact disc with a soft cloth.
CD	sy.
		Compact disc is heavily	Replace with a compact disc with no scratches.
		scratched or warped.
	Sound is bad directly	Water droplets may form on	Let dry for about 1 hour with the power on.
	after power is turned	the internal lens when the
	on.	car is parked in a humid
		place.

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem.

CD

Error Display	Cause	Measure
ERROR 2	A CD is caught inside the CD deck and is	This is a failure of CD deck s mechanism
	not ejected.	and consult your store of purchase.
ERROR 3	A CD cannot be played due to scratches,	Replace with a non-scratched,
	etc.	non-warped-disc.

If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.

12 DB166