Basic Operations
Adjusting the fader
| , |
| ] button and select | |
|
| |||
|
| |||
“FADER”. |
|
|
|
|
The display changes as follows:
“FRONT XX” will be displayed where “XX” is the value from 1 to 12.
“REAR XX” will be displayed where “XX” is the value from 1 to 12.
Notes:
When Fader is 0, “CENTER” will be displayed instead.
The factory default setting is “CENTER”.
Adjusting MAGNA BASS EX
The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
1. Press and hold the [ ] button for 1 second or longer to turn on the MAGNA BASS EX ef- fect.
indicator lights in the display.
2. Press and hold the [ ] button for 1 second or longer to turn off the MAGNA BASS EX ef- fect.
indicator goes off from the display.
Note:
The factory default setting is “OFF”.
AUX function
This system has an external jack input in the front panel where you can listen to sounds and music from external devices connected to this unit.
1.Connect the external music player to the [AUX] input.
2.Press the [SRC] button and select the AUX mode to activate the AUX function.
Notes:
Use only the 3.5mm stereo jack for the AUX jack input.
Volume can be adjusted through the unit. If you face difficulties of hearing sound even after volume has been adjusted, please refer section “Selecting AUX IN sensitivity” on page 23 for details.
English
CT (Clock Time) function
The CT function receives CT data sent from an RDS station and displays the time. Press the [D] button to switch to the CT display.
∗If a CT data is not being received,
Note:
CT data is not transmitted in some countries and by some broadcast stations. Also, in some areas, the CT display may not accurate.
DB178RMP / DB179RMP / DB179RGMP | 11 |