Radio Operations
Manual tuning | Auto store |
English
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1.Press the [BND] button and select the de- sired band (FM or AM (MW/LW)).
∗If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.
2.Tune into a station.
●Quick tuning:
Press and hold the [a] or [d] button for 1 second or longer to tune in a station.
●Step tuning:
Press the [a] or [d] button to manually tune in a station.
Recalling a preset station
A total of 24 preset positions
1.Press the [BND] button and select the de- sired band (FM or AM (MW/LW)).
2.Press the corresponding [DIRECT] button to recall the stored station.
∗Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.
Notes:
•The only FM band that can store the stations will automatically be stored in FM3.
•When the auto store is performed, the station pre- viously stored in the memory at that position is overwritten.
•If there are fewer than 6 stations with good recep- tion, the stations previously stored at the remain- ing [DIRECT] buttons are not overwritten.
•A station already stored in one of [DIRECT] but- tons cannot be stored in another [DIRECT] but- tons.
1.Press the [BND] button and select the de- sired band (FM or AM (MW/LW)).
2.Press and hold the [PS/AS] button for 2 sec- onds or longer. The stations with good recep- tion are stored automatically to the preset channels.
∗If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.
1.Press the [PS/AS] button.
2.When a desired station is tuned in, press the [PS/AS] button again to continue receiving that station.
Manual memory
1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
Note:
•Be careful not to press and hold the [PS/AS] but- ton for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts stor- ing stations.
12 DB338R/BD239R/DB238R