Basic Operations

Adjusting the balance

1.Press the [A-M] button and select “BAL”.

2.Turning the [ROTARY] knob clockwise empha- sizes the sound from the right speaker; turn- ing it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

Adjusting the fader

1.Press the [A-M] button and select “FAD”.

2.Turning the [ROTARY] knob clockwise empha- sizes the sound from the front speakers; turn- ing it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

ADJ mode adjustment

1.Press [D] button more than 1 second at POWER ON mode to enter ADJ mode, the previous se- lected ADJ items will be called out.

2.Press [D] button again at ADJ mode will cancel ADJ mode and return to previous display.

3.Press [SRC] button will also release ADJ mode.

4.ADJ mode will also be released when current source mode is changed. (Mode changes of LOADING, EJECT, interruption and interrup- tion release)

5.Press []/[] button to switch the ADJ mode

items,

CLOCK(E) SCRN SVR

6.The ADJ Mode Title will be display for 2 sec- onds before showing the ADJ Mode setting.

English

Note:

•Bass and Treble can only be adjusted when the “Z- enhancer” is off.

Turning on/off MAGNA BASS EX

The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment func- tion, but emphasizes the deep bass sound area to provide you with a dynamic sound.

∗The factory default setting is off.

Press and hold the [A-M] button for 1 second or longer to turn the MAGNA BASS EX and “M-B EX” in the display lights on or off.

Switching display

Press and hold the [BND] button, and then press the [DISP] button to select the desired display.

The display switches in the following order:

Main Display Æ Clock Display Æ Main Display …

∗If the display is changed by other button operation when the clock is displayed, the clock display re- turns automatically after the operation.

Adjusting clock setting

1.Press the [D] button and press [ ]/[] button to select "CLOCK (E)".

2.Press [ ] button to start clock adjustment, the HOUR is selected and blinking by default.

3.Press []/[ ] button to toggle HOUR and MINUTE selection.

4.Turn the [ROTARY] knob clockwise to in- creases hour/minute or counterclockwise to decrease hour/minute.

5.Press [ ] button to confirm the clock setting, the clock will blink for 2 seconds and return to "CLOCK(E)".

Note:

•If you remove the vehicle's battery for a check or repair, the clock will be reset, so you must set it again.

Adjusting screensaver setting

1.Press the [D] button and press []/[] button to select "SCRN SVR".

2."SS ON" or "SS OFF" will be display after 2 seconds.

Illumination dimmer function

When the illumination line of this unit is connected with the car-side illumination signal line, the display illumination of this unit dims in connection with turning on the car-side illumination.

3.Turn the [ROTARY] knob clockwise to turn on the screensaver or counterclockwise to turn off the screensaver.

4.If Screensaver setting is set to on, Screensaver will be activated after 30 seconds of no key op- eration.

DB255 11