Clarion DB356MP Radio Mode Operations, FM reception, Listening to the radio, Manual tuning, Seek tuning, Preset memory function, Manual memory function, Recalling ISR

Radio Mode Operations

English

FM reception

For enhanced FM performance the tuner includes signal actuated stereo control and multipath noise reduction circuits.

Listening to the radio

1.Press the [SRC] button and select the radio mode. then the radio will be on.

2.To select a preset band, press the [BND] but- ton, then select one of the preset bands such as FM1, FM2, FM3 or AM. Every time the [BND] button is pressed, the display will change as:

F1 ÆF2 ÆF3 ÆAM ÆF1...

3.Press the [] or [] button to tune in the desired station.

Manual tuning

1.Press the [BND] button to select the desired band FM1, FM2, FM3 or AM.

2.Press and hold the [BND] button for 1 second or longer, then the "MANU" is lit in the display, which means that a manual selection function is on.

3.Press the [] or [] button to manually tune in a station.

Seek tuning

1.Press the [BND] button to select the desired band FM1, FM2, FM3 or AM.

2.If the "MANU" is lit in the display, press and hold the [BND] button for 1 second or longer. When the "MANU" display is off, the seek tun- ing is now available.

3.Press the [] or [] button to automatically seek in a station.

Preset memory function

Preset memory function can store up to 24 sta- tions: six stations for each of FM1, FM2, FM3 and AM.

Manual memory function

1.Press the [BND] button, to select a band you want to store in the memory.

2.Press the [] or [] button to tune into a desired station.

3.Press and hold one of the [DIRECT] button for 2 seconds or longer to store the current sta- tion into preset memory.

Auto store function (Automatic Station Store)

1.Press [BND] button to select the desired band FM1, FM2, FM3 or AM.

2.Press and hold the [ ] button for 1 second or longer. The stations at which the reception is the strongest will be automatically stored in the memory.

Notes:

•When the auto store is performed, the station pre- viously store in the memory at that position is over- written.

•When the number of stations stored is less than six, the previous content of the memory for each direct button will be retained.

Preset scanning (Preset Station Scan)

When the [ ] button is pressed, the "SCN" will be indicated with preset memory numbers and the stations are tuned in for 7 seconds each in the

order in which they were stored. Press the [ ] button again to cancel the preset scanning mode.

Instant station recall (ISR)

With this function, a specific radio station can be recalled from any mode.

ISR memory

1.Press the [SRC] button, then select the radio mode.

2.Select the radio station which you want to store in the memory.

3.Press and hold the [ISR] button for 2 seconds or longer.

Recalling ISR

Press the [ISR] button and the display will show "ISR". Then the radio station previously memorized will be selected. Press the [ISR] button again to disengage the unit from the Recalling ISR func- tion.

12 DB356MP