6. OPERATIONS

Basic Operations

Note:Be sure to read this chapter referring to the front diagrams of

chapter “2. CONTROLS” on page 5 (unfold).

English

CAUTION

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Audio Mode Adjustments

Press the [A-M] button to select the adjustment mode. The mode switches as follows each time the [A-M] button is pressed:

BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous mode

When the Z-Enhancer function is turned on, BASS (bass) and TRE (treble) cannot be se- lected.

Turning on/off the power

Note:

•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [FNC] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

3.Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit.

Switching display

Press and hold the [BND] button, and then press the [DISP] button to select the desired display.

The display switches in the following order: Main ➜ Clock (CT) ➜ Main …

∗If the display is changed by other button operation when the clock (CT) is displayed, the clock dis- play returns automatically after the operation.

∗The example shows the display in radio mode.

Main display

Selecting a mode

1.Press the [FNC] button to change the opera- tion mode.

2.Each time you press the [FNC] button, the operation mode changes in the following or- der:

Radio mode ➜ CD mode ➜ Radio mode...

Note:

•If the CD mode is selected when no disc is in- serted, the display shows “NO DISC”.

Adjusting the volume

Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.

∗The volume level is from 0 (minimum) to 33 (maximum).

Clock(CT) display

Main display

Setting the Z-Enhancer

This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “Z-EHCR OFF”.

Each time you press the [Z-ENCR] button, the tone effect changes in the following order:

“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “Z- ENHANCER 3” ➜ “Z-EHCR OFF” ➜ “Z- ENHANCER 1”...

•Z-ENHANCER 1 : bass emphasized

•Z-ENHANCER 2 : treble emphasized

•Z-ENHANCER 3 : bass and treble empha-

sized

• Z-EHCR OFF : no sound effect

DB538RMP 11