APX/DPX Amplifiers 15
English
Applications
Mono subwoofer system (APX2180 and APX4360)
In this application, the rear channels are bridged for mono operation to drive a
subwoofer while the front channels are available to drive a set of full-range speakers.
Stereo Amp configuration (APX2180)
•Set crossover mode to LP
•Set input mode switch to L + R (Mono)
•Set crossover frequency to ~80Hz
•Fine-tune crossover frequency to suit
musical tastes and performances
•4Ω min
FRONT
REAR
12V
+
REM GND FUSES
BRIDGED (4
++
--
RIGHT
LEFT
++
--
2 2
)
Stereo Amp configuration (APX4360)
•Set rear crossover mode to LP
•Set input mode switch to L + R (Mono)
•Set crossover frequency to ~80Hz
•Fine-tune crossover frequency to suit
musical tastes and performances
•4Ω min
Note:
You may bridge the front, rear or both pairs of channels using the above
settings.
APX-DPXOwnersManual.pmd 2006-03-14, 21:4615