CD Operations

Loading a CD

1.Press OPEN button 1 to access the CD in- sertion slot behind the FLIP DOWN PANEL.

2.Insert a CD into the center of the insertion slot with the label side facing up. The CD plays automatically after loading.

Notes:

Never insert foreign objects into the CD insertion slot.

If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service.

Discs not bearing the mark and CD-ROMs cannot be played by this unit.

Loading 3" (8 cm) compact discs

No adapter is required to play a 3" CD.

Insert the 3" CD into the center of the insertion slot.

When a 3" CD is loaded, “SINGLE” lights in the display.

3. Close the FLIP DOWN PANEL.

CAUTION

Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.

Notes:

If the FLIP DOWN PANEL does not open fully, gently open with your hand.

After loading a CD, always close the FLIP DOWN PANEL.

Listening to a CD already inserted

Press FNC button 3 to select the CD mode. Play starts automatically. If no CD is loaded in the unit, “NO DISC” appears in the display.

Pausing play

1.Press Play/pause button 2 to pause play. “PAUSE” appears in the display.

2.To resume CD play, press Play/pause button 2 again.

Ejecting a CD

1.Press OPEN button 1 to open the FLIP DOWN PANEL.

2.Press Eject button ) to eject the CD. Take it out from the ejected position.

DISC CHECK” appears in the display when the CD is left in the ejected position.

3.Close the FLIP DOWN PANEL.

CAUTION

Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.

Notes:

If the FLIP DOWN PANEL does not open fully, gently open with your hand.

After taking out the CD, be sure to close the FLIP DOWN PANEL.

If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload).

3" CDs (8 cm) are not auto reloaded. Be sure to remove it when ejected.

Notes:

If you force a CD into before auto reloading, this can damage the CD.

The radio mode is selected automatically 4 seconds after Eject button ) is pressed. If the auto antenna terminal for this unit is connected, the antenna is extended automatically. If you are in a location

where the antenna may strike something, press FNC button 3 to switch the mode.

DISC CHECK” in the display shows you a CD is left in the unit. Be sure to press Eject button ) and remove it in this case.

Selecting a track

Track-up

1.Press the right side of SEARCH button % to move ahead to the beginning of the next track.

2.Each time you press the right side of SEARCH button %, the track advances ahead to the beginning of the next track.

Track-down

1.Press the left side of SEARCH button % to move back to the beginning of the current track.

2.Press the left side of SEARCH button % twice to move to the beginning of the previous track.

14 DRX7675z

Page 12
Image 12
Clarion DRX7675Z owner manual CD Operations