English

Basic Operations

Adjusting the Z-Enhancer Plus

1.Press the [Z+] button and select the Z- Enhancer Plus mode to adjust.

2.Press the [A-M] button and turning the

[ROTARY] knob clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.

When B-BST 0” is selected, you can ad- just the bass in the range of –3 to 3.

When “IMPACT 0” is selected, you can ad- just the bass and treble in the range of –3 to 3.

When “EXCITE 0” is selected, you can ad- just the bass and treble in the range of –3 to 3.

Press and hold the [Z+] button for 2 seconds or longer to change to the “CUSTOM” mode.

Bass/treble characteristics become flat and the indication “Z+ FLAT” is shown in the display.

Press the [Z+] button again to change to the “Z+ OFF” mode.

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

1.Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect. M-B EX” lights in the display.

2.Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect. M-B EX” goes off from the display.

The factory default setting is off.

CT (Clock Time) function

The CT function receives CT data sent from a RDS station and displays the time. Press the [DISP] button to switch to the CT display.

If a CT data is not being received, CT––:–– appears in the display.

Note:

CT data is not transmitted in some countries and by some broadcast stations. Also, in some areas, the CT may not display accurately.

Radio Operations

Listening to the radio

1.Press the [FNC] button and select the radio mode. The frequency or PS appears in the display.

PS: Programme service name

2.Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:

FM1 FM2 FM3 AM (MW/LW) FM1...

3.Press the [a] or [d] button to tune in the desired station.

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune in to only broadcast stations with a good reception sensitivity.

1.Press the [BND] button and select the desired band (FM or AM (MW, LW)).

2.Tune into a station.

If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.

If “TA” is lit in the display, TP stations are automatically sought.

DX SEEK

Press the [a] or [d] button to automatically seek a station.

When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies.

When seek tuning starts, “DX” appears in the display.

LOCAL SEEK

If you press and hold the [a] or [d] button for 1 second or longer, local seek tuning is carried out. Broadcast stations with good reception sensitivity are selected.

When local seeking starts, “LO” appears in the display.

14 DXZ448R