Basic Operations

Sound Adjustment

You can adjust a sound effect or tone quality to your preference.

To change sound setting

1.Press the [] button to switch to the sound adjustment selection display.

∗The factory default sound setting is “Z- EHCR”.

2.Then press the [x] or [v] button to select the sound adjustment mode. Each time you press the [x] or [v] button, the sound adjustment mode changes as following order:

“Z-EHCR”↔ “BASS” ↔ “TREBLE” ↔

“BALANCE” ↔ “FADER” ↔ “REAR/S-W”↔ “S-W VOL” ↔ “HPF”

3.Press the [w] or [z] button to adjust the selected audio mode.

∗In the case of display blinking “ENT”, you

can press the [ ] button to adjust the setting value.

4.After completing settings, press the [] button to return to the previous mode.

●Setting the Z-Enhancer

This unit are provided with 3 types of sound tone effects stored in memory.

Select the one you prefer.

∗The factory default setting is “OFF”.

2-1. Select “Z-EHCR”.

3-1. Each time you press the [w] or [z] button, the tone effect changes in the following order:

“EXCITE” ↔ “IMPACT” ↔ “B-BOOST”↔ “OFF”

EXCITE : bass and treble emphasized mid deemphasized

When “EXCITE” is set:

3-2. Press the [ ] button.

3-3. Press the [w] or [z] button to adjust the bass and treble in the range of +3 to –3.

∗The factory default setting is “0”.

3-4. Press the [ ] button to return to previous mode.

When “IMPACT” is set:

3-2. Press the [ ] button.

3-3. Press the [w] or [z] button to adjust the bass and treble in the range of +3 to –3.

∗The factory default setting is “0”.

3-4. Press the [ ] button to return to previous mode.

When “B-BOOST” is set:

3-2. Press the [ ] button.

3-3. Press the [w] or [z] button to adjust the bass in the range of +3 to –3.

∗The factory default setting is “0”.

3-4. Press the [ ] button to return to previous mode.

●Adjusting the bass

This adjustment can be performed only when the Z-Enhancer is set to “OFF”.

2-1. Select “BASS”.

3-1. Press the [w] or [z] button to adjust the bass.

∗The factory default setting is “0”. (Adjustment range: +8 to –8)

●Adjusting the treble

This adjustment can be performed only when the Z-Enhancer is set to “OFF”.

2-1. Select “TREBLE”.

3-1. Press the [w] or [z] button to adjust the treble.

∗The factory default setting is “0”. (Adjustment range: +7 to –7)

●Adjusting the balance

English

IMPACT : bass and treble emphasized

B-BOOST : bass emphasized

OFF : no sound effect

2-1. Select “BALANCE”.

3-1. Press the [w] or [z] button to adjust the balance of the right and left speakers.

∗The factory default setting is “CENTER” (center). (Adjustment range: RIGHT12 to LEFT12 (right 12 to left 12))

DXZ475MP 11