Radio Operations
Seek tuning | Manual memory |
1.Press the [BAND] button and select the de- sired band (FM or AM).
∗If “MANU” is lit in the display, press and hold the [BAND] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available.
2.Press the [a] or [d] button to automatically seek a station.
When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the fre- quency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1.Press the [BAND] button and select the de- sired band (FM or AM).
∗If “MANU” is not lit in the display, press and hold the [BAND] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.
2.Tune into a station.
●Quick tuning:
Press and hold the [a] or [d] button for 1 second or longer to tune in a station.
●Step tuning:
Press the [a] or [d] button to manually tune in a station.
1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
Auto store
Auto store is a function for storing up to 6 sta- tions that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.
1.Press the [BAND] button and select the de- sired band (FM or AM).
2.Press and hold the [SCN] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
∗If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in pre- set memory in order. This function is useful when searching for a desired station in memory.
1.Press the [SCN] button.
2.When a desired station is tuned in, press the [SCN] button again to continue receiving that station.
Note:
•Be careful not to press and hold the [SCN] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.
English
Recalling a preset station
A total of 24 preset positions
1.Press the [BAND] button and select the de- sired band (FM or AM).
2.Press the corresponding [DIRECT] button to recall the stored station.
∗Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.
Instant station recall (ISR)
Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even oper- ates with the unit in other modes.
●ISR memory
1.Select the station that you wish to store in ISR memory.
2.Press and hold the [ISR] button for 2 seconds or longer.
●Recalling a station with ISR
In any mode, press the [ISR] button to turn on the radio function and tune the selected radio station. “ISR” appears in the display. Press the [ISR] button again to return to the previous mode.
DXZ525 15
