Clarion DXZ548RMP Basic Operations, Adjusting the tone, Adjusting the treble (Gain, Frequency), Adjusting the bass (Gain, Frequency, Q-curve), Adjusting the balance

		Basic Operations
Adjusting the tone	Adjusting the treble (Gain,
Press the [A-M] button and select the item to	Frequency)
adjust. Each time you press the [A-M] button,	This adjustment can be performed when the Z-
the item changes as following order:
	Enhancer Plus is set to “CUSTOM”.
●When “BASS BOOST” is set
	1.	Press the [A-M] button and select “TREBLE”.
“B-BOOST 0” ➜ “BAL 0” ➜ “FADER 0” ➜
	2. Turning the [ROTARY] knob clockwise em-
Last function mode.
		phasizes the treble; turning it counterclock-
●When “IMPACT” is set
		wise attenuates the treble.
“IMPACT 0” ➜ “BAL 0” ➜ “FADER 0” ➜		∗ The factory default setting is “TÅGAIN 0Δ.
Last function mode.		(Adjustment range: –6 to +6)
●When “EXCITE” is set	3.	Press the [a] or [d] button to select
“EXCITE 0” ➜ “BAL 0” ➜ “FADER 0” ➜		“TÅFREQ12kΔ.
		Turning the [ROTARY] knob clockwise or
Last function mode.
●When “CUSTOM” is set		counterclockwise to select the frequency.
		∗ The factory default setting is “TÅFREQ12kΔ.
“BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FADER
		(Adjustment 8 kHz/12 kHz)
0” ➜ Last function mode.
	4. When the adjustment is complete, press the
●When “Z+ OFF” is set
		[A-M] button several times until the function
“BAL 0” ➜ “FADER 0” ➜ Last function
		mode is reached.
mode.

English

Adjusting the bass (Gain,

Frequency, Q-curve)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “BASS”.

2.Turning the [ROTARY] knob clockwise em- phasizes the bass; turning it counterclock- wise attenuates the bass.

∗The factory default setting is “BÅGAIN 0Δ. (Adjustment range: –6 to +8)

3.Press the [a] or [d] button to select “BÅFREQ 50Δ.

Turning the [ROTARY] knob clockwise or counterclockwise to select the frequency.

∗The factory default setting is “BÅFREQ 50Δ.(Adjustment 50/80/120 Hz)

4.Press the [a] or [d] button to select “BÅQ 1Δ.

Turning the [ROTARY] knob clockwise or counterclockwise to select the Q-curve.

∗The factory default setting is “BÅQ 1Δ. (Adjust- ment 1/1.25/1.5/2)

5.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BAL 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “BAL 0”. (Adjust- ment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FADER 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “FADER 0”. (Ad- justment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

DXZ548RMP 13