Basic Operations
Setting the Z-Enhancer PlusAdjusting the tone

This unit are provided with 4 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “Z+ OFF”.

Each time you press the [Z+] button, the tone effect changes in the following order:

“Z+ OFF” ➜ “Z+ BASS BOOST” ➜ “Z+ IMPACT” ➜ “Z+ EXCITE” ➜ “Z+ CUSTOM” ➜

“Z+ OFF” ...

• Z+ BASS BOOST : bass emphasized

• Z+ IMPACT

: bass and treble

 

emphasized

• Z+ EXCITE

: bass and treble

 

emphasized mid de-

 

emphasized

• Z+ CUSTOM

: user custom

• Z+ OFF

: no sound effect

Adjusting the Z-Enhancer Plus

1.Press the [Z+] button and select the Z- Enhancer Plus mode to adjust.

2.Press the [A-M] button and turning the

[ROTARY] knob clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.

Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order:

●When “Z+ BASS BOOST” is set “SUB-WOOF VOL 0” ➜ “BASS BOOST 0"

➜“BALANCE 0” ➜ “FADER 0” ➜ Last function mode.

●When “Z+ IMPACT” is set

“SUB-WOOF VOL 0” ➜ “IMPACT 0” ➜ “BALANCE 0” ➜ “FADER 0” ➜ Last function mode.

●When “Z+ EXCITE” is set

“SUB-WOOF VOL 0” ➜ “EXCITE 0” ➜ “BALANCE 0” ➜ “FADER 0” ➜ Last function mode.

●When “Z+ CUSTOM” is set “SUB-WOOF VOL 0” ➜ “ BASS GAIN 0”

➜“ TREBLE GAIN 0” ➜ “BALANCE 0” ➜ “FADER 0” ➜ Last function mode.

●When “Z+ OFF” is set

“SUB-WOOF VOL 0” ➜ “BALANCE 0” ➜ “FADER 0” ➜ “Last function mode.

∗“SUB-WOOF VOL” can be adjusted only when “SUB-WOOFER” is set to “ON”.

English

●When “BASS BOOST 0” selected, you can adjust the bass in the range of –3 to 3.

●When “IMPACT 0” selected, you can adjust the bass and treble in the range of –3 to 3.

●When “EXCITE 0” selected, you can adjust the bass and treble in the range of –3 to 3.

∗When Z-Enhancer Plus is selected, press and hold the [Z+] button for 1 second or longer to change to the “CUSTOM” mode.

Bass/treble characteristics become flat and the “Z+ FLAT” is shown in the display.

Press the [Z+] button again to change to the “Z+ OFF” mode.

Adjusting the subwoofer output volume

You can adjust the volume output from the unit’s subwoofer output terminal.

1.Press the [A-M] button and select “SUB-WOOF VOL 0”.

2.Turning the [ROTARY] knob clockwise increases the output volume; turning it counterclockwise decreases the output volume.

∗The factory default setting is “0”. (Setting range: –6 to 6)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

DXZ656MP 13